WCDSC006XUMA1 Infineon

WCDSC006 EiceDRIVER WCDSC006 Features Independent High Side and Low Side TTL logic inputs 0.3 V to 7 V Input pin capability for increased robustness Integrated bootstrap diode Maximum bootstrap voltage of 60 V 2 A source/4 A sink current capability for high and low side drivers Potential applications Inductive wireless charger Qualified according Jedec Standard Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Description The WCDSC006 is a half bridge driver designed to drive both high-side and low-side MOSFETs in a half-bridge inverter configuration. The floating high-side driver is capable of driving a high-side MOSFET operating up to 60 V bootstrap voltage. The high-side bias voltage is generated using a bootstrap technique. The inputs of the driver are TTL logic compatible and can withstand input voltages up to 7 V regardless of the VDD voltage. Even though high-side and low-side power device are driven independently, the driver enforces a 5 ns (typ) deadtime to prevent shoot-through. The WCDSC006 is available in PG-WSON-10 pins, with exposed pad, connected to ground, to aid power dissipation. VIN 4.75V...5.5V VDD HB R GHS HO Q2 HI C BOOT uC on tro l ler HS L W C D S C 0 0 6 R LOAD R C GLS LI LO Q1 PGND Figure 1 Typical application Datasheet Please read the Important Notice and Warnings at the end of this document V2.2 www.infineon.com 2020-05-28 EiceDRIVER WCDSC006 Description Packages Ordering information Base Part Number Package Type Standard Pack Orderable Part Marking Code Number Form Quantity WCDSC006 PG-WSON-10 Tape and Reel 6000 WCDSC006XUMA1 EDrWCDS006 Datasheet 2 V2.2 2020-05-28