CPC9909NE IXYS

CPC9909 High Efficiency, Off-Line, High Brightness LED Driver INTEGRATED CIRCUITS DIVISION Features Description 8V to 550V Input Voltage Range The CPC9909 is a low cost, high-efficiency, offline, DC DC high-brightness (HB) LED driver manufactured using >90% Efficiency IXYS Integrated Circuits Divisions high voltage Stable Operation at >50% Duty Cycle BCDMOS on SOI process. This driver has an internal Drives Multiple LEDs in Series/Parallel regulator that allows it to operate from 8V to Regulated LED Current DC Linear or PWM Brightness Control Inputs 550V . This wide input operating voltage range DC Resistor-Programmable Minimum Off-Time enables the driver to be used in a broad range of HB SOIC-8 RoHS Compliant Package LED applications. Buck or Boost Configuration The CPC9909 features pulse frequency modulation Applications (PFM) with a constant peak-current control scheme. This regulation scheme is inherently stable, allowing Flat-Panel Display RGB Backlighting the driver to be operated above 50% duty cycle Signage and Decorative LED Lighting without open loop instability or sub-harmonic DC/DC or AC/DC LED Driver Applications oscillations. LED dimming can be implemented by applying a small DC voltage to the LD pin, or by applying a low frequency PWM signal to the PWMD pin. The CPC9909 is available in a standard 8-lead SOIC package and a thermally enhanced 8-lead SOIC package with an exposed thermal pad (EP). Ordering Information Part Description CPC9909N SOIC-8 (100/Tube) CPC9909NTR SOIC-8 Tape & Reel (2000/Reel) CPC9909NE SOIC-8 EP (Exposed Pad) (100/Tube) SOIC-8 EP (Exposed Pad)Tape & Reel CPC9909NETR (2000/Reel) CPC9909 Block Diagram V DD Voltage V IN Regulator R T RT Minimum Off-Time TRIG One Shot Voltage Q Reference GATE S Q - + R LD - + CS PWMD GND DS-CPC9909-R04 www.ixysic.com 1CPC9909 INTEGRATED CIRCUITS DIVISION 1. Specifications 3 1.1 Package Pinout . 3 1.2 Pin Description . 3 1.3 Absolute Maximum Ratings 4 1.4 Recommended Operating Conditions 5 1.5 Electrical Characteristics 5 1.6 Thermal Characteristics 5 2. Functional Description . 6 2.1 Overview 6 2.2 LED Driver Theory of Operation 6 2.3 Input Voltage Regulator . 7 2.4 Current Sense Resistor . 7 2.5 Current Sense Blanking 7 2.6 Enable/Disable Function 7 2.7 Minimum Off-Time One-Shot 7 2.8 Inductor Design . 8 2.9 Gate Output Drive . 8 2.10 Linear Dimming 9 2.11 PWM Dimming 9 2.12 Combination Linear and PWM Dimming . 9 3. Manufacturing Information 10 3.1 Moisture Sensitivity . 10 3.2 ESD Sensitivity 10 3.3 Reflow Profile . 10 3.4 Board Wash . 10 3.5 Mechanical Dimensions . 11 2 www.ixysic.com R04