R73PI2470DQ00K Kemet

Polypropylene Pulse/High Frequency Capacitors R73, Polypropylene Film/Foil, Radial (Automotive Grade) Overview Applications The R73 Series is constructed of polypropylene film and metal Typical applications include resonant circuit, high frequency foil or metallized film and metal foil with radial leads of tinned high current, snubber and silicon-controlled rectifier wire. The radial leads are electrically welded to the metal (SCR and IGBT) and SiC (e.g. MOSFET) commutation layer on the ends of the capacitor winding. The capacitor is circuits as well as applications with high voltage and high encapsulated in a self-extinguishing solvent resistant plastic current. Not suitable for across-the-line application case with thermosetting resin material meeting the UL 94 (see Suppressor Capacitors). V0 requirements. Two different winding constructions are used depending on voltage parameters. Please see the Performance Characteristics for more information. Automotive grade devices (up to lead spacing 22.5 mm) meet the demanding Automotive Electronics Council s AECQ200 qualification requirements. Benefits Voltage range: 100 2,000 VDC Capacitance range: 100 pF 2.2 F Lead Spacing: 15 37.5 mm Capacitance tolerance: 2.5% (for 2-section construction only) 5%, 10% Climatic category: 55/105/56 IEC 600681 Operating temperature range of 55C to +105C RoHS compliance and lead-free terminations Tape & Reel packaging in accordance with IEC 602862 Self-healing Automotive (AECQ200) grades available up to lead spacing 22.5 mm Part Number System R73 E I 2470 AA 00 H Rated Voltage Lead Spacing Capacitance Capacitance Series Packaging Internal Use (VDC) (mm) Code (pF) Tolerance Polypropylene E = 100 I = 15.0 The last three See Ordering 00 H = 2.5% Film/Foil G = 160 N = 22.5 digits represent Options Table 10 (for 2-section I = 250 R = 27.5 significant fig ures. 30 construction only) M = 400 W = 37.5 The fir st digit 40 J = 5% P = 630 specifies the total L0 K = 10% Q = 1000 number of zeros to R = 1250 be added. T = 1600 U = 2000 Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard F3037 R73 9/13/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comFilm Capacitors Polypropylene Pulse/High Frequency Capacitors R73, Polypropylene Film/Foil, Radial (Automotive Grade) Ordering Options Table Lead Spacing Lead and Lead Length Nominal Type of Leads and Packaging Packaging (mm) (mm) Code Standard Lead and Packaging Options Bulk (Bag) Short Leads 4 +2/0 SE Ammo Pack H = 18.5 0.5 DQ 0 Other Lead and Packaging Options Tape & Reel (Standard Reel 355 mm) H = 18.5 0.5 GY 15 0 Tape & Reel (Large Reel 500 mm) H = 18.5 0.5 CK 0 Bulk (Bag) Short Leads 3.5 +0.5/0 JB 22.5 Bulk (Bag) Short Leads 4.0 +0.5/0 JE Bulk (Bag) Short Leads 3.2 +0.3/0.2 JH Bulk (Bag) Long Leads 181 JM Bulk (Bag) Long Leads 30 +5/0 40 Bulk (Bag) Long Leads 25 +2/1 50 Standard Lead and Packaging Options Bulk (Tray) Short Leads 4 +2/0 SE Other Lead and Packaging Options Tape & Reel (Standard Reel 355 mm) H = 18.5 0.5 GY 0 1 Tape & Reel (Large Reel 500 mm) H = 18.5 0.5 CK 0 27.5 Bulk (Tray) Short Leads 3.5 +0.5/0 JB Bulk (Tray) Short Leads 4.0 +0.5/0 JE Bulk (Tray) Short Leads 3.2 +0.3/0.2 JH Bulk (Tray) Long Leads 181 JM Bulk (Tray) Long Leads 30 +5/0 40 Bulk (Tray) Long Leads 25 +2/1 50 Standard Lead and Packaging Options Bulk (Tray) Short Leads 4 +2/0 SE Other Lead and Packaging Options Bulk (Tray) Short Leads 3.5 +0.5/0 JB 37.5 Bulk (Tray) Short Leads 4.0 +0.5/0 JE Bulk (Tray) Short Leads 3.2 +0.3/0.2 JH Bulk (Tray) Long Leads 181 JM Bulk (Tray) Long Leads 30 +5/0 40 Bulk (Tray) Long Leads 25 +2/1 50 1 = Not for all sizes, seePackaging Quantitie table. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard F3037 R73 9/13/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com