AAA3528AVU/ARBGS-112

AAA3528AVU/ARBGS-112 Single Level Surface Mount CBI DESCRIPTIONS PACKAGE DIMENSIONS z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode z The Blue source color devices are made with InGaN Light Emitting Diode z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Surface mount type z Compatible with automatic placement equipment RECOMMENDED SOLDERING PATTERN z Compatible with infrared and vapor phase solder (units : mm tolerance : 0.1) processes z Black case enhances contrast ratio z Housing material meets UL94V-0 flammability rating z Lens material meets UL94-HB flammability rating z Moisture sensitivity level: 3 z RoHS compliant APPLICATIONS z Used as indicators of indicating the Degree, Functions, Positions etc z Electronic Test & Measurement Instruments z Communications Testing Equipment Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. ATTENTION 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. Observe precautions for handling 4. The device has a single mounting surface. The device must be mounted according to the specifications. electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 40 80 Hyper Red (AlGaInP) AAA3528AVU/ARBGS-112 Water Clear 40 80 60 Blue (InGaN) 80 200 Green (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 6 2018 Kingbright. All Rights Reserved. Spec No: DSAN8418 / 1102015357 Rev No: V.6B Date: 09/05/2018 AAA3528AVU/ARBGS-112 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 630 Wavelength at Peak Emission I = 20mA Blue 465 - nm F peak Green 515 Hyper Red 621 1 Dominant Wavelength I = 20mA Blue 470 - nm F dom Green 525 Hyper Red 20 Spectral Bandwidth at 50% REL MAX Blue 22 - nm I = 20mA F Green 35 Hyper Red 25 Capacitance C Blue 100 - pF Green 45 Hyper Red 2 2.5 2 Forward Voltage I = 20mA V Blue 3.3 4 V F F Green 3.3 4.1 Hyper Red 10 Reverse Current (V = 5V) I Blue - 50 uA R R Green 50 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Blue Green Power Dissipation P 75 120 123 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 30 mA F 1 Peak Forward Current I 195 100 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 250 450 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 6 2018 Kingbright. All Rights Reserved. Spec No: DSAN8418 / 1102015357 Rev No: V.6B Date: 09/05/2018