XPower Part Number: AAD1-9090SY28ZC PRELIMINARY SPEC Super Bright Yellow ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Super high flux output and high luminance. Designed for high current operation. Low thermal resistance. Low voltage DC operated. Superior ESD protection. Package: 500pcs/reel. Applications Not reflow compatible. z traffic signaling. The component is internally protected with silicone gel. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. RoHS compliant. z substitution of micro incandescent lamps. Application Note z portable light source (e.g. bicycle flashlight). Static electricity and surge damage the LEDS. z signal and symbol luminaire for orientation. It is recommended to use a wrist band or anti-electrostatic z marker lights (e.g. steps, exit ways, etc). glove when handling the LEDs. z decorative and entertainment lighting. All devices, equipment and machinery must be electrically z indoor and outdoor commercial and residential grounded. architectural lighting. Package Dimensions YELLOW Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7159 REV NO: V.2 DATE: MAR/31/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP:1201200075 Selection Guide luminous Intensity v (lm) Viewing lv(cd) 350 mA 2 350mA 2 Angle 1 Dice Lens Type Part No. Min. Typ. Min. Typ. 21/2 AAD1-9090SY28ZC Super Bright Yellow(AlGaInP) WATER CLEAR 8 11.5 25 32 100 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25C Parameter Symbol Value Unit Power dissipation Pt 0.9 W Junction temperature TJ 110 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +100 C DC Forward Current 1 IF 350 mA Peak Forward Current 2 IFM 500 mA Thermal resistance 1 Rth j-slug 12 C/W Electrostatic Discharge Threshold (HBM) 8000 V Iron Soldering 3 350C For 3 Seconds Notes: 1. Results from mounting on MCPCB. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3.1.29mm distance from solder joint to package. Electrical / Optical Characteristics at TA=25C Parameter Symbol Value Unit Wavelength at peak emission IF=350mA Typ. 590 nm peak Dominant Wavelength IF=350mA Typ. dom 1 588 nm 20 nm Spectral bandwidth at 50%REL MAX IF=350mA Typ. Forward Voltage IF=350mA Min. 2.0 Forward Voltage IF=350mA Typ. VF 2 2.5 V Forward Voltage IF=350mA Max. 3.0 Temperature coefficient of peak TCpeak 0.09 nm/C IF=350mA, -10C T 100C Typ. Temperature coefficient of dom TCdom 0.06 nm/C IF=350mA, -10C T 100C Typ. Temperature coefficient of VF TCV -3.2 mV/C IF=350mA, -10C T 100C Typ. Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH7159 REV NO: V.2 DATE: MAR/31/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP:1201200075