APDA3020LSECK/J3-PF Kingbright

APDA3020LSECK/J3-PF 3.0 x 2.0 mm Right Angle SMD LED DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red device is based on light emitting diode chip made from AlGaInP Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 mm x 2.0 mm SMD LED, 2.8 mm thickness Low power consumption Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free Tinned pads for improved solderability RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewin g Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 700 1000 APDA3020LSECK/J3-PF Hyper Red (AlGaInP) Water Clear 10 *250 *500 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAN8381 / 1203014448 Rev No: V.5A Date: 01/05/2021 APDA3020LSECK/J3-PF ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Wavelength at Peak Emission I = 2mA Hyper Red - 640 - nm F peak 1 Dominant Wavelength I = 2mA Hyper Red - 625 - nm F dom Spectral Bandwidth at 50% REL MAX Hyper Red - 20 - nm I = 2mA F Capacitance C Hyper Red - 27 - pF 2 Forward Voltage I = 2mA V Hyper Red 1.5 1.8 2.1 V F F Reverse Current (V = 5V) I Hyper Red - - 10 A R R Temperature Coefficient of peak TC Hyper Red - 0.13 - nm/C peak I = 2mA, -10C T 85C F Temperature Coefficient of dom TC Hyper Red - 0.06 - nm/C dom I = 2mA, -10C T 85C F Temperature Coefficient of V F TC Hyper Red - -2 - mV/C V I = 2mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 84 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 V - 2 Thermal Resistance (Junction / Ambient) R 480 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 340 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAN8381 / 1203014448 Rev No: V.5A Date: 01/05/2021