L-130WCP/2EGW Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-130WCP/2EGW High Efficiency Red Green Features Description z Bi-level right angle housing LED. The High Efficiency Red source color devices are made with z Pre-trimmed leads for pc board mounting. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Black case enhances contrast ratio. Light Emitting Diode. z High reliability. The Green source color devices are made with Gallium z Housing UL rating:94V-0. Phosphide Green Light Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB1131 REV NO: V.11 DATE: APR/24/2010 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1102000158 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 High Efficiency Red (GaAsP/GaP) 7 30 L-130WCP/2EGW WHITE DIFFUSED 60 Green (GaP) 7 25 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Green 565 High Efficiency Red 625 D 1 Dominant Wavelength nm IF=20mA Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Green 30 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Green 15 High Efficiency Red 2 2.5 VF 2 Forward Voltage V IF=20mA Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB1131 REV NO: V.11 DATE: APR/24/2010 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1102000158