L-934SRD-14V Kingbright

T-1 (3mm) SOLID STATE LAMP Part Number: L-934SRD-14V Super Bright Red Features Description z Low power consumption. The Super Bright Red source color devices are made with z Popular T-1 diameter package. Gallium Aluminum Arsenide Red Light Emitting Diode. z General purpose leads. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z 14V internal resistor. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD0622 REV NO: V.2A DATE: JUL/05/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029220 Selection Guide Iv (mcd) 2 Viewing V= 14V Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 70 100 L-934SRD-14V Super Bright Red (GaAlAs) Red Diffused 40 *20 *40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Red 660 *655 nm VF=14V D 1 Dominant Wavelength Super Bright Red 640 *640 nm VF=14V 1/2 Spectral Line Half-width Super Bright Red 20 nm VF=14V IF Forward Current Super Bright Red 10.5 13.5 mA VF=14V IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. *Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 160 mW Forward Voltage 16 V Reverse Voltage 5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAD0622 REV NO: V.2A DATE: JUL/05/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029220