57mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SBC23-11EGWA High Efficiency Red Green Features Description z 2.3 inch digit height. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Excellent character appearance. Light Emitting Diode. z High light output. The Green source color devices are made with Gallium z Easy mounting on P.C. boards or sockets. Phosphide Green Light Emitting Diode. z Multicolor available. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0656 REV NO: V.1A DATE: JUN/21/2013 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1301000676 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 31000 57000 High Efficiency Red (GaAsP/GaP) *9000 *17000 Common Cathode. SBC23-11EGWA White Diffused Rt. Hand Decimal 31000 65000 Green (GaP) *9000 *20000 Note: 1.Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Green 565 High Efficiency Red 617 D 1 Dominant Wavelength nm IF=20mA Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Green 30 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Green 15 Forward Voltage High Efficiency Red 8.0(4.0) 10.0(5.0) VF 2 F=20mA V I (DP) Green 8.8(4.4) 10.0(5.0) Reverse Current High Efficiency Red 10 IR uA VR=5V (Per Chip) Green (10) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 300 250 mW (DP) (150) (125) DC Forward Current 30 25 mA (DP) (30) (25) Peak Forward Current 1 160 140 mA (DP) (160) (140) Reverse Voltage 20 V (Per Chip) (10) Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0656 REV NO: V.1A DATE: JUN/21/2013 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1301000676