WP7113MBD Kingbright

T-1 3/4 (5mm) SOLID STATE LAMP ATTENTION WP7113MBD BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features The Blue source color devices are made with GaN on SiC LOW POWER CONSUMPTION. Light Emitting Diode. POPULAR T-1 3/4 DIAMETER PACKAGE. Static electricity and surge damage the LEDS. GENERAL PURPOSE LEADS. It is recommended to use a wrist band or RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically AVAILABLE ON TAPE AND REEL. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2410 REV NO: V.1 DATE: APR/19/2005 PAGE: 1 OF4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101005103Selection Guide Iv (mcd) V i e w i n g 20 mA Angle Part No. Dice Lens Type Min. Typ. 21/2 WP7113MBD BLUE (GaN) BLUE DIFFUSED 36 60 20 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Peak Wavelength Blue 430 nm I =20mA peak F D Dominant Wavelength Blue 466 nm I =20mA F Spectral Line Half-width Blue 60 nm I =20mA 1/2 F C Capacitance Blue 100 pF V =0V f=1MHz F V Forward Voltage Blue 3.8 4.5 V I =20mA F F I Reverse Current Blue 10 uA V = 5V R R Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2410 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101005103