WP799SURKMGKW Kingbright

8mm BI-COLOR INDICATOR LAMP Part Number: WP799SURKMGKW Hyper Red Mega Green Features Description z Uniform light output. The Hyper Red source color devices are made with AlGaInP z Low power consumption. on GaAs substrate Light Emitting Diode. z 3 leads with one common lead. The Mega Green source color devices are made with z Long life - solid state reliability. AlGaInP on GaAs substrate Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2682 REV NO: V.4 DATE: APR/08/2009 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101007426 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Hyper Red (AlGaInP) 380 600 WP799SURKMGKW WHITE DIFFUSED 50 Mega Green (AlGaInP) 50 130 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 peak Peak Wavelength nm IF=20mA Mega Green 574 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Mega Green 570 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Mega Green 20 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Mega Green 15 Hyper Red 1.95 2.5 VF 2 Forward Voltage F=20mA V I Mega Green 2.1 2.5 Hyper Red 10 IR Reverse Current uA VR = 5V Mega Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Mega Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 185 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2682 REV NO: V.4 DATE: APR/08/2009 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101007426