TM Tflex CR350 2-Part Dispensable Gap Filler PRODUCT DESCRIPTION Tflex CR350 is a soft, compliant, high thermal conductivity, two-part dispensable gap filler providing a low thermal resistance and high reliability. This dispensable gap filler minimizes stress on components during assembly while providing the reliability of a traditional thermal pad. Tflex CR350 is ideal for application where large gap tolerances are present, meeting vertical shock and vibe requirements, typical of the automotive industry. The 1:1 mix is easily dispensable through a wide variety of off the shelve dispensing equipment. It is an A+B putty material that cures in place after dispensing and mixing to perfectly fill the gap. The experts at Laird can help design the system that is right for you. FEATURES AND BENEFITS Thermal Conductivity 3.6W/mK Dispensable and Compliant Easily reworkable Ideal for large gaps Environmentally friendly solution that meets regulatory requirements MAIN PROPERTIES TYPICAL PROPERTIES VALUE TEST METHOD Composition Two-part ceramic filled dispensable silicone gap filler Color Part A:Pink Part B:White Visual Viscosity before combining (cps) 350,000 ASTM D2196 Mix ratio 1:1 Shelf Life (month) 6 PROPERTIES AFTER CURING Thermal Conductivity (W/mK) 3.6 Hot Disk Density (g/cc) 3.2 Helium Pycnometer Hardness (Shore 00 3sec) 69 ASTM D2240 American: +1.866.928.8181 Outgassing TML (weight %) 0.58 ASTM E595 Europe: +44.8031.2460.0 Min. bond line thickness (m) 85 Laird lab Asia: +86.755.2714.1166 Temperature Range -40C to 150C Laird Reliability Test 2 Rth 1mm, 50C, 50psi 0.437 Cin /W ASTM D5470 (Modified) www.laird.com Dielectric Breakdown 9KV AC ASTM D149 Voltage 1mm UL Flammability Rating V-0 Laird LAB 14 Volume Resistivity 2.6 x 10 ohm-cm ISO 14309 Cure condition 1 hour 70C, Laird LAB 0.5 hour 100C TM THR-DS-Tflex CR350 020719 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All information is subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. PACKAGING TYPE FILL VOLUME FILL WEIGHT 50cc duo-cartridge (2x25cc) 47cc 150g 400cc duo-cartridge (2x200cc) 387cc 1240g 1 gallon pail x2 4062cc x2 13kg x2 5 gallons pail x2 6250cc x2 20kg x2 CURING PROFILE The above cure profiles are guideline recommendations. Cure conditions (time and temperature) may vary based on customers experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures. TM THR-DS-Tflex CR350 020719 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All information is subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.