FGG.1T.305.CLAC60Z LEMO

T SERIES IP 68 PUSH-PULL CONNECTORS T series T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to pre- vent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per IEC 60529 standard and have the following main features: - IP68 mated - Compatible with existing B sockets - Push-Pull self-latching system - Same mounting hole as B sockets - Mechanical key (FGG) with multiple keys - Black-chrome plated brass and plastic outershell available to avoid cross-mating - Multipole types 2 to 32 contacts - High packing density for space savings - For cables 1.0 up to 10.5 mm - 360 shielding for full EMC shielding - Solder, crimp or print contacts Technical Characteristics Mechanical and Climatical Value Standard 1) Endurance > 1000 cycles IEC 60512-5 test 9a Humidity up to 95% at 60C 2) Temperature range -55C, +200C / (-20C, +80C) Resistance to vibration 10-2000 Hz, 15 g IEC 60512-4 test 6d Shock resistance 100 g, 6 ms IEC 60512-4 test 6c Salt spray corrosion test > 1000 h IEC 60512-6 test 11f 3) Protection index (mated) IP68/IP66 IEC 60529 Latching retention force (average value) From 85 N up to 300 N (depending of the size) Climatical category 50/175/21 IEC 60068-1 1) 2) Note: Up to 5000 cycles for size 3T. operating temperature is -20C, +80C for watertight or vacuumtight models fitted with an FPM (Viton ) o-ring 3) and Epoxy. IP68 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal. Electrical Value Standard Shielding efficiency > 75 dB at 10 MHz / > 40 dB at 1 GHz IEC 60169-1-3 Material and Treatments Outershell and collet nut Latch sleeve/earthing crown Other metallic components Material Surface treatment Material Surface treatment Material Surface treatment Brass Chrome Brass/Bronze Nickel Brass Nickel Brass Black chrome Brass/Bronze Nickel Brass Nickel POM Brass/Bronze Nickel Brass Nickel Contacts Insulators Material Contact type Material Contact type Brass (UNS C 34500) Male contact PEEK Crimp, solder or print Bronze (UNS C 54400) Female contact Part Section Showing Internal Components Straight plug Fixed socket 1 outer shell 4 2 6 3 7 5 6 1 2 5 4 3 1 6 7 8 9 10 2 latch sleeve 1 outer shell 3 inner shell 2 earthing crown 4 insulator 3 hexagonal nut 5 male contact 4 insulator 6 split insert carrier 5 female contact earthing cone 7 6 o-ring 8 gasket locking washer 7 collet 9 10 collet nut www.lemo.com