CSM2-10 Low Cost High IP3 Mixer for Rev. V3 PCS/WLL Applications Features Product Image LO & RF 10 TO 2800 MHz IF 10 TO 2000 MHz LO DRIVE +10 dBm (NOMINAL) SURFACE MOUNT HIGH INTERCEPT +20 dBm (TYP.) +260C REFLOW COMPATIBLE Description The CSM2-10 is a double balanced mixer, designed for use in the high volume wireless applications. The design utilizes Schottky ring quad diodes and broadband baluns to attain excellent per- formance. Ordering Information Part Number Package CSM2-10 Surface Mount Electrical Specifications: Z = 50 Lo = +10 dBm (Downconverter application only) 0 Typical Guaranteed Parameter Test Conditions Units +25C -40 to +85C SSB Conversion fR = 10 to 1200 MHz, fL = 10 to 1200 MHz, fI = 10 to 1000 MHz dB 8.0 8.5 9.0 Loss(max) fR = 1200 to 2800 MHz, fL = 1200 to 2800 MHz, fi = 10 to 2000 MHz dB 9.0 10.0 10.5 SSB Noise Figure dB Within 1 dB of conversion loss L - R Isolation fL = 10 to 1200 MHz dB 35 32 30 (min) fL = 1200 to 2800 MHz dB 30 28 26 L - I Isolation (min) fL = 10 to 2800 MHz dB 27 23 21 R - I Isolation (min) fR = 10 to 2800 MHz dB 27 1 dB Conversion fL = +10 dBm dBm +7 Comp. fL = 10 to 2800 MHz, fI = 10 to 1000 MHz, fR = 10 to 2800 MHz dBm +20 Input IP3 fL = 2000 to 2800 MHz, fI = 10 to 2000 MHz, fR = 2000 to 2800 MHz dBm +17 R-Port VSWR fR = 10 to 2800 MHz 1.80:1 fL =10 to 2000 MHz 1.90:1 L-Port VSWR fL = 2000 to 2800 MHz 2.50:1 I-Port VSWR fI = 10 to 2200 MHz 1.80:1 11 1 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: CSM2-10 Low Cost High IP3 Mixer for Rev. V3 PCS/WLL Applications Typical Performance Curves 22 2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: