Product Information


MASW-000822-12770T electronic component of MACOM

RF Switch ICs 50-6000MHz 10W -40C +85C Iso 32dB

Manufacturer: MACOM
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges

Price (USD)

10: USD 7.2619 ea
Line Total: USD 72.619

0 - Global Stock
MOQ: 10  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock

Ships to you between Thu. 05 Oct to Mon. 09 Oct

MOQ : 3000
Multiples : 3000
3000 : USD 3.9496

0 - Global Stock

Ships to you between Fri. 29 Sep to Thu. 05 Oct

MOQ : 10
Multiples : 1
10 : USD 6.7241

Product Category
RF Switch ICs
Factory Pack Quantity :
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
MAAP-011027-000SMB electronic component of MACOM MAAP-011027-000SMB
RF Amplifier Amplifier,Sample Brd Asy,8W,5.2-5.9GHz
Stock : 1
A66-3 electronic component of MACOM A66-3
RF Amplifier 10-1000MHz NF 3.0dB Gain 26.0dB
Stock : 1
MAADSS0008SMB electronic component of MACOM MAADSS0008SMB
RF Development Tools Sample Board Assembly, SOT-25
Stock : 1
MAAL-010705-001SMB electronic component of MACOM MAAL-010705-001SMB
RF Development Tools Sample Board,Assy,2mmPDFN-8LD
Stock : 0
MA46H204-1056 electronic component of MACOM MA46H204-1056
MACOM Varactor Diodes Brkdn V 30V min. Gamma .48-.5
Stock : 136
M8TH electronic component of MACOM M8TH
Up/Down Conv Mixer 2GHz 4-Pin TO-8
Stock : 1
DS-109-PIN electronic component of MACOM DS-109-PIN
MACOM Signal Conditioning 10-500MHz 50 ohm IL .6dB max
Stock : 14
AL7S electronic component of MACOM AL7S
Stock : 1
M85C electronic component of MACOM M85C
RF Mixer Mixer,Microwave
Stock : 1
A57 electronic component of MACOM A57
RF Amplifier 10-500MHz NF 4.8dB Gain 14.7dB
Stock : 1
Image Description
MASW-009444-001SMB electronic component of MACOM MASW-009444-001SMB

RF Switch ICs Sample Board Assy, 1mmX1-PDFN-6LD
Stock : 1

MASWSS0130SMB electronic component of MACOM MASWSS0130SMB

RF Switch ICs SMB,DPDT Switch 0.5-3.0 GHz,3mm -12MLF
Stock : 1

MASW-010350-001SMB electronic component of MACOM MASW-010350-001SMB

- MASW-010350 Switch, SP4T 10MHz ~ 4GHz Evaluation Board
Stock : 1

MASWSS0151SMB electronic component of MACOM MASWSS0151SMB

- MASWSS0151 Switch, SPDT 0Hz ~ 3GHz Evaluation Board
Stock : 1

SKY13335-381LF electronic component of Skyworks SKY13335-381LF

RF Switch ICs .1-6.0GHz SPDT IL .4dB @2.5GHz
Stock : 1

HMC194AMS8E electronic component of Analog Devices HMC194AMS8E

Analog Devices Hittite RF Switch ICs
Stock : 1

RFSW6024TR13 electronic component of Qorvo RFSW6024TR13

RF Switch ICs 5-6000MHz SPDT
Stock : 1

F2915NBGK electronic component of Integrated Device Tech F2915NBGK

RF Switches QFN-24 RoHS
Stock : 1

TPG113S6 electronic component of TECH PUBLIC TPG113S6

RF Switches SOT23-6 RoHS
Stock : 0

MMS006PP3E electronic component of Microchip MMS006PP3E

- MMS006PP3 Switch, SPDT 0Hz ~ 20GHz Evaluation Board
Stock : 0

MASWSS0181 GaAs SPDT 2.5 V High Power Switch Rev. V3 DC - 3.0 GHz Features Functional Schematic Low Voltage Operation: 2.5 V Harmonics: <-67 dBc +34 dBm & 1 GHz Pin 1 Pin 6 Low Insertion Loss: 0.40 dB 1 GHz High Isolation: 20 dB 2 GHz RF1 V1 0.5 micron GaAs pHEMT Process Lead-Free SOT-26 Package 100 pF 100% Matte Tin Plating over Copper GND RFC Halogen-Free Green Mold Compound 100 pF 260C Reflow Compatible RF2 V2 RoHS* Compliant Version of MASWSS0006 100 pF Description The MASWSS0181 is a GaAs PHEMT MMIC single pole two throw (SPDT) high power switch in a Pin Configuration lead-free SOT-26 package. The MASWSS0181 is ideally suited for applications where high power, low Pin Pin Name Description control voltage, low insertion loss, high isolation, small size and low cost are required. 1 RF1 RF Port 1 2 GND RF Ground Typical applications are for GSM and DCS handset systems that connect separate transmit and receive 3 RF2 RF Port 2 functions to a common antenna, as well as other 4 V2 Control 2 related handset and general purpose applications. This part can be used in all systems operating up to 5 RFC RF Common Port 3 GHz requiring high power at low control voltage. 6 V1 Control 1 The MASWSS0181 is fabricated using a 0.5 micron gate length GaAs pHEMT process. The process features full passivation for performance and reliability. 2,3 1 Absolute Maximum Ratings Ordering Information Part Number Package Parameter Absolute Maximum MASWSS0181 Bulk Packaging Input Power 38 dBm (0.5 - 3 GHz, 2.5 V Control) MASWSS0181TR-3000 3000 piece reel Voltage 8.5 V MASWSS0181SMB Sample Test Board Operating Temperature -40C to +85C 1. Reference Application Note M513 for reel size information. Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. MACOM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit for additional data sheets and product information. For further information and support please visit: MASWSS0181 GaAs SPDT 2.5 V High Power Switch Rev. V3 DC - 3.0 GHz 4 Electrical Specifications: T = 25C, V = 0 V / 2.5 V, Z = 50 A C 0 Parameter Test Conditions Units Min. Typ. Max. DC - 1 GHz 0.40 0.65 5 Insertion Loss 1 - 2 GHz dB 0.50 2 - 3 GHz 0.75 DC - 1 GHz 23.0 26 Isolation 1 - 2 GHz dB 20 2 - 3 GHz 16 DC - 2 GHz 20 Return Loss dB 2 - 3 GHz 16 Two Tone, +26 dBm / tone, IP3 dBm 57 5 MHz Spacing, >50 MHz P0.1dB dBm 39 nd 2 Harmonic 1 GHz, P = 34 dBm dBc -75 IN rd 3 Harmonic 1 GHz, P = 34 dBm dBc -75 -67 IN T , T 10% to 90% RF, 90% to 10% RF s 0.04 RISE FALL 50% control to 90% RF, and T , T s 0.06 ON OFF 50% control to 10% RF Transients In Band mV 50 Control Current A 50 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 100 pF for 0.5 - 3 GHz. 6,7 Qualification Truth Table Qualified to MACOM specification REL-201, Process V1 V2 ANT RF1 ANT - RF2 Flow -2. 1 0 On Off Handling Procedures 0 1 Off On Please observe the following precautions to avoid 6. Differential voltage, V (state 1) - V (state 0), must be +2.5 V damage: minimum and must not exceed +8 V. 7. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit for additional data sheets and product information. For further information and support please visit:

Tariff Desc

8542.31.00 51 No ..Application Specific (Digital) Integrated Circuits (ASIC)

Electronic integrated circuits: Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
Monolithic integrated circuits:
Aeroflex / Metelics (MACOM)
Aeroflex Metelics
M/A-COM Technology Solutions