MASW-009444 GaAs SP2T 1.8 V Switch Rev. V1 DC - 6.0 GHz Features Functional Diagram Voltage Operation as low as 1.6 V Insertion Loss: 0.20 dB 1 GHz Lead-Free 1 mm 6-Lead PDFN Package RoHS* Compliant and 260C Reflow Compatible V1 RFC Description M/A-COMs MASW-009444 is a GaAs PHEMT MMIC single pole two throw (SP2T) switch in a GND V2 miniature 1x1mm 6-lead PDFN package. The N/C N/C MASW-009444 is ideally suited for applications where low control voltage, low insertion loss, moderate isolation, and small size are required. RF2 RF1 Typical applications are for filter and antenna switching in handset systems that connect separate receive functions to a common antenna, as well as other related handset and general purpose applications. This part can be used in all systems Pin Configuration operating up to 6 GHz requiring high power at low control voltage. Pin No. Function Description 1 V1 Control 1 The MASW-009444 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The 2 GND Ground process features full passivation for performance 3 RF1 RF Port 1 and reliability. 4 RF2 RF Port 2 5 V2 Control 2 6 RFC RF Common 1,2 3,4 Ordering Information Absolute Maximum Ratings Parameter Absolute Maximum Part Number Package Max Input Power MASW-009444-TR3000 3000 piece reel +27 dBm (0.5 - 3 GHz, 2.7V Control) MASW-009444-001SMB Sample Board Operating Voltage +8.5 volts 1. Reference Application Note M513 for reel size information. Operating Temperature -40C to +85C 2. All sample boards include 5 loose parts. Storage Temperature -65C to +150C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-009444 GaAs SP2T 1.8 V Switch Rev. V1 DC - 6.0 GHz 5 Electrical Specifications: T = 25C, V = 1.8 V, Z = 50 A C 0 Parameter Test Conditions Units Min. Typ. Max. DC - 1 GHz 0.2 .45 Insertion Loss 1 - 2 GHz dB 0.3 2 - 3 GHz 0.4 DC - 1 GHz 22 28 Isolation 1 - 2 GHz dB 23 2 - 3 GHz 19 DC - 2.5 GHz <1.3 VSWR dB 2.5 - 3 GHz <1.3 Two Tone +10 dBm, 5 MHz Spacing, >50 MHz IP3 dBm 47 P = 0 dBm V = 0/2.5 V IN C V = 1.8V 15 C P1dB dBm V = 2.7V 24 C Trise, Tfall 10% to 90% RF, 90% to 10% RF ns 10 Ton, Toff 50% control to 90% RF, and 50% control to 10% RF ns 15 Transients In Band mV 30 Control Current VC = 1.8V A 5 10 5. Insertion Loss can be optimized by varying the DC Blocking Capacitor value, i.e. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3.0 GHz 6 Handling Procedures Truth Table Please observe the following precautions to avoid damage: V1 V2 RFC - RF1 RFC - RF2 0 V +1.8 to 5 V On Off Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive +1.8 to 5 V 0 V Off On to electrostatic discharge (ESD) and can be 6. External DC blocking capacitors are required on all RF ports damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: