UPS115Ue3 Ultra Low VF Schottky Barrier Rectifier Compliant 1.0 Amp, 15 Volt DESCRIPTION In Microsemis Powermite 1 SMT Package, these high efficiency Schottky rectifiers offer power handling capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. In addition to its size advantages, Powermite package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment. Important: For the latest information, visit our website UPS115Ue3 MECHANICAL and PACKAGING CASE: Molded epoxy package meets UL94V-0 at 1/8 inch. TERMINALS: Copper with annealed matte-tin plating for RoHS compliance. Solderable per MIL-STD-750 method 2026. (Consult factory for tin-lead plating). MARKING: Body marked with S15U. POLARITY: Cathode designated by Tab 1 (bottom). TAPE & REEL option: Packaging per EIA-481-B with 8 mm tape. Consult factory for quantities. WEIGHT: Approximately 0.016 grams. Package Dimensions on last page. See PART NOMENCLATURE UPS 1 15 U e3 Powermite Schottky RoHS Compliance e3 = RoHS compliant Maximum Average DC Blank = non-RoHS compliant Output Current Ultra Low Forward Voltage Maximum Peak Reverse Voltage ELECTRICAL CHARACTERISTICS RATING (Conditions) SYMBOL VALUE UNIT Maximum Instantaneous Forward Voltage (I = 1.0 Amps, T = +25C) F J V F 0.31 Volts Maximum Instantaneous Reverse Current (V = 15 Vdc, T = +25C) mA R J I RM 10 Typical Junction Capacitance (T = 25C, V = 5V) 150 pF J R C J RF01128, Rev. A (4/25/13) 2013 Microsemi Corporation Page 2 of 5