Mikromedia 3 for STM32F4 Capacitive FPI with frame PID: MIKROE-3840 Rich with peripherals Mikromedia 3 for STM32F4 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the multimedia. Mikromedia 3 for STM32F4 CAPACITIVE FPI with frame has two mikroBUS Shuttle connectors, a brand-new addition to the mikroBUS standard in the form of a 2x8-pin IDC header with 1.27mm (50mil) pitch. mikroBUS Shuttle extension board is an add-on board equipped with the conventional mikroBUS socket, which ensures compatibility with 894 Click boards. Awesome graphics on MCU driven TFT Mikromedia 3 for STM32F4 CAPACITIVE FPI with frame is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. By featuring a 3.5 TFT display with capacitive touch screen driven by the powerful graphics controller that can display the 24-bit color palette (16.7 million colors), along with a DSP-powered embedded sound CODEC IC, represents a perfect solution for any type of multimedia application. Develop-on & build-in the same board Mikromedia 3 for STM32F4 CAPACITIVE FPI (FPI stands for Front Panel Integration) with frame is designed as the complete solution. It can be implemented directly into any project, with no additional hardware modifications. At its core, there is a powerful 32-bit STM32F407VGT6 microcontroller from STMicroelectronics, which provides sufficient processing power for the most demanding tasks. Board has a TFT display with a metal frame, and four mounting holes that enable simple installation in various kinds of industrial appliances. For most uses, a nice casing is all that is needed to turn this product into a high-performance, feature-rich device. This board requires the use of an external programmer and debugger, preferably CODEGRIP or mikroProg. The microcontroller can be programmed and debugged over the JTAG/SWD compatible 2x5 pin header, labeled as PROG/DEBUG. Specifications Type mikromedia Architecture ARM (32-bit) Display size 3.5 320x240px Resolution 320x240px Graphic controller SSD1963 Touch Screen Capacitive Silicon Vendor STM mikroBUS No. 2 Frame Type Metal Frame Features Accel,USB Type C,USB Host,SD Card,ON/OFF switch,MP3,Battery Powered,Batt. Chg. when OFF Display type mikromedia Downloads Mikromedia 3 for STM32F4 Capacitive FPI with frame Manual Mikromedia 3 for STM32F4 Capacitive FPI with frame 2D and 3D files Mikromedia 3 for STM32F4 Capacitive FPI with frame schematic Mikromedia 3 for STM32F4 Capacitive FPI with frame example on libstock Powered by TCPDF (www.tcpdf.org)