Surface Mount Monolithic Ampliefi r DC-7 GHz Features Miniature SOT-89 Package Frequency range, DC to 7 GHz Internally Matched to 50 Ohms Output power, 11.2 dBm typ. Generic photo used for illustration purposes only Excellent package for heat dissipation, exposed metal bottom Gali 29+ Aqueous washable Protected by US Patent 6,943,629 CASE STYLE: DF782 Applications +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site Cellular for RoHS Compliance methodologies and qualifications PCS Communication receivers & transmitters General Description Gali 29+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi. It has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses patented Tran- sient Protected Darlington configuration and is fabricated using InGaP HBT technology. Expected MTTF is 2,000 years at 85C case temperature. Gali 29+ is designed to be rugged for ESD and supply switch-on transients. simplified schematic and pin description RF-OUT and DC-IN 3 RF-OUT & DC-IN RF IN 4 2 GROUND 1 RF-IN GROUND Function Pin Number Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen RF IN 1 for the frequency of operation. RF output and bias pin. DC voltage is present on this pin therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias RF-OUT and DC-IN 3 without loss of RF signal due to the bias connection, as shown in Recommended Application Circuit. Connections to ground. Use via holes as shown in Suggested Layout for PCB GND 2,4 Design to reduce ground path inductance for best performance. Notes REV. J A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. M151107 B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled D60-1117.DOC to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Q0201031 GALI-29+ RS/TD/CP/AM Mini-Circuits 200430 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 4Monolithic InGaP HBT MMIC Amplifier Gali 29+ Electrical Specifications at 25C and 40mA, unless noted Parameter Min. Typ. Max. Units Frequency Range* DC 7 GHz Gain f=0.1 GHz 15.4 dB f=1 GHz 15.1 f=2 GHz 12.7 14.7 f=3 GHz 13.7 f=4 GHz 13.6 f=6 GHz 12.9 f=8 GHz 14.2 f=10 GHz 12.5 Input Return Loss f= DC to 3 GHz 14 dB f= 3 to 7 GHz 12.5 Output Return Loss f= DC to 3 GHz 14 dB f= 3 to 7 GHz 8.0 Output Power 1 dB compression f=7 GHz 10.0 11.2 dBm Output IP3 f=2 GHz 24.7 dBm Noise Figure f=2 GHz 6.0 dB Recommended Device Operating Current 40 mA Device Operating Voltage 3.2 3.6 4.0 V Device Voltage Variation vs. Temperature at 40 mA -1.9 mV/C Device Voltage Variation vs. Current at 25C 8.6 mV/mA 1 Thermal Resistance, junction-to-case 120 C/W *Guaranteed specification DC-7 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature* -45C to 85C Storage Temperature -65C to 150C Operating Current 55mA Input Power 15dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground leads. *Based on typical case temperature rise 2C above ambient. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 4