Ultra High Dynamic Range Monolithic Ampliefi r PHA-101+ 50 0.05 to 1.5 GHz The Big Deal Ultra High IP3 Broadband High Dynamic Range without SOT-89 PACKAGE external Matching Components a,b May be used as a replacement to WJ AH101 Product Overview PHA-101+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addi - tion, the PHA-101+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Key Features Feature Advantages Broadband covering primary wireless communications bands: Broad Band: 0.05 to 1.5 GHz Cellular, PCS, LTE The PHA-101+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides Extremely High IP3 enhanced linearity over a broad frequency range as evidence in the IP3 being typically Versus DC power Consumption 20 dB above the P 1dB point. This feature makes this amplifier ideal for use in: 45 dBm typical at 0.9 GHz Driver amplifiers for complex waveform up converter paths Drivers in linearized transmit systems Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Unlike competing products, Mini-Circuits PHA-101+ provides Input and Output Return Loss Required of 9.9-12.5 dB up to 1.5 GHz without the need for any external matching components Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ AH101 part number is used for identification and comparison purposes only. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 5Ultra High Dynamic Range Monolithic Ampliefi r 0.05-1.5 GHz Product Features High IP3, 45 dBm typ. at 0.9 GHz Gain, 15.2 dB typ. at 0.9 GHz High Pout, P1dB 26 dBm typ. at 0.9 GHz Low noise figure, 4.0 dB at 0.9 GHz Generic photo used for illustration purposes only No external matching components required a,b May be used as replacement for WJ AH101 CASE STYLE: DF782 PHA-101+ Typical Applications Base station infrastructure +RoHS Compliant CATV The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications LTE General Description PHA-101+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-101+ has good input and output return loss over a broad frequency range without the need for external matching components. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. simplified schematic and pin description 3 RF-OUT & DC-IN RF-OUT RF-IN and DC-IN 4 2 GROUND 1 RF-IN GND Function Pin Number Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for RF IN 1 the frequency of operation. RF output and bias pin. DC voltage is present on this pin therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias RF-OUT and DC-IN 3 without loss of RF signal due to the bias connection, as shown in Recommended Ap- plication Circuit, Fig. 2 Connections to ground. Use via holes as shown in Suggested Layout for PCB Design GND 2,4 to reduce ground path inductance for best performance. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ AH101 part number is used for identification and comparison purposes only. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. A to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp M156908 PHA-101+ Mini-Circuits TH/RS/CP/AM 161024 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 5