Low Noise, High IP3 Monolithic Ampliefi r PMA-5452+ 50 0.05 to 6 GHz The Big Deal 3mm x 3mm MCLP Pkg3mm x 3mm MCLP Pkg Ultra Low Noise Figure, 0.6 dB High IP3/Low Current, 40mA Wideband, up to 6 GHz Product Overview Mini-Circuits PMA-5452+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to 6 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive receiver applications. This design operates on a single 3V supply at only 40mA and is internally matched to 50 Ohms. Key Features Feature Advantages Ultra Low Noise, 0.6dB Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise High IP3, 32 dBm Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic range: sensitivity & two-tone spur-free dynamic range At only 40mA, the PMA-5452+ is ideal for remote applications with limited available power or Low Current, 40 mA densely packed applications where thermal management is critical. Operating over a broadband the PMA-5452+ covers the primary wireless communications bands: Broad Band Cellular, PCS, LTE, WiMAX No external matching elements required to achieve the advertised noise and output power over the Internally Matched full band MCLP Package Low Inductance, repeatable transitions, excellent thermal pad Max Input Power, +20 dBm Ruggedized design operates up to input powers of +20dBm without the need of an external limiter Low, small signal operating current of 40 mA nominal maintains junction temperatures typically High Reliability below 105C at 85C ground lead temperature Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 6Low Noise, High IP3 Monolithic Ampliefi r 0.05-6 GHz Product Features Single Positive Supply Voltage, 3V, Id=40mA Ultra Low Noise Figure, 0.6 dB typ. at 0.5 GHz High IP3, 32 dBm typ. 1GHz Gain, 19 dB typ. at 1 GHz Generic photo used for illustration purposes only Output Power, up to +18.5dBm typ. Micro-miniature size - 3mm x 3mm PMA-5452+ Aqueous washable CASE STYLE: DQ849 +RoHS Compliant Typical Applications The +Suffix identifies RoHS Compliance. See our web site Cellular for RoHS Compliance methodologies and qualifications ISM GSM WCDMA LTE WiMAX WLAN UNII and HIPERLAN General Description PMA-5452+ is a high dynamic range, low noise, high IP3, high output power, monolithic amplifier. Manu - factured using E-PHEMT* technology enables it to work with a single positive supply voltage. simplified schematic and pad description BIAS (7) NC (8) BIAS RF-IN (1) RF-OUT & DC (6) GND RF-IN RF-OUT and DC NC (2) NC (5) NC (3) NC (4) Pad Function Description (See Application Circuit, Fig. 3) Number RF-IN 1 RF input pad RF output pad (connected to RF-OUT via blocking external cap C2, and Supply RF-OUT & DC 6 voltage Vs via RF Choke L1) BIAS 7 Bias pad (connected to Vs via Rbias) GND paddle in center of bottom Connected to ground NOT USED 2,3,4,5,8 No internal connection recommended use: per PCB Layout PL-299 *Enhancement mode Pseudomorphic High Electron Mobility Transistor. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. C to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp M151107 PMA-5452+ Mini-Circuits TH/RS/CP/AM 200528 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 6