Low Noise, High IP3 Monolithic Ampliefi r PSA4-5043+ 50 0.05 to 4 GHz The Big Deal Ultra Low Noise Figure, 0.75 dB CASE STYLE: MMM1362 High IP3 and Po at low DC power consumption a,b May be used as a replacement for SPF5043Z Class 1B HBM ESD rating (500V) Product Overview Mini-Circuits PSA4-5043+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to 4 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive high dy - namic range receiver applications. This design operates on +3 to +5V supply at only 33 mA at 3V and 56mA at +5V, is internally matched to 50 ohms and is supplied in a super small SC-70 (SOT-343) MSL 1 package. Key Features Feature Advantages Ultra Low Noise: 0.75 dB at 1 GHz Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching 0.98 dB at 2 GHz Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise High IP3, 33.5 dBm Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic range: sensitivity & two-tone spur-free dynamic range The PSA4-5043+ provides up to +21dBm output power at 1dB compression enabling this amplifier High Output Power, +21 dBm to support high linear dynamic range requirements.- Operating over a broadband from 50 MHz to 4 GHz, the PSA4-5043+ covers the primary wireless Broad Band, up to 4 GHz communications bands: Cellular, PCS, LTE, WiMAX No external matching elements required to achieve the advertised noise and output power over the Internally Matched full band SOT-343 Package Small size, industry standard package Low, small signal operating current of 53mA nominal maintains junction temperatures typically High Reliability below 125C at 85C ground lead temperature The PSA4-5043+ is a super low noise PHEMT based design. Unlike many other PHEMT designs. Class 1B ESD (500V, HBM) Mini-Circuits incorporates ESD protection on die to achieve industry leading ESD performance for a low noise amplifier. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The RFMD SPF5043Z part number is used for identification and comparison purposes only. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 5Low Noise, High IP3 Monolithic Ampliefi r 0.05-4 GHz Product Features Ultra Low Noise Figure, 0.75 dB typ. at 1 GHz Class 1B ESD rating (500V) High IP3, up to 33.5 dBm typ. at 1 GHz Output Power at 1dB comp., up to +21 dBm typ. Gain, 18.4 dB typ. at 1GHz Generic photo used for illustration purposes only Supply Voltage, +3V, Id=33mA, +5V, Id=56mA Aqueous washable a,b May be used as a replacement for SPF5043Z PSA4-5043+ CASE STYLE: MMM1362 Typical Applications +RoHS Compliant Cellular The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications ISM GSM WCDMA LTE WiMax WLAN GPS General Description PSA4-5043+ is an advanced wide band, high dynamic range, low noise, high IP3, high output power, monolithic amplifier. Manufactured using E-PHEMT* technology enables it to work with a single positive supply voltage. simplified schematic and pin description RF OUT GND and DC-IN RF-IN RF-OUT and DC-IN GND RF IN Function Pin Description (See Application Circuit, Fig. 2) Number RF IN 3 RF input pin (connect to RF-IN via DC blocking cap) RF output pin (connected to RF-out via blocking cap C2 and supply voltage Vd RF-OUT & DC-IN 1 via RF Choke L1) Connections to ground: use via holes as shown in Suggested Layout for PCB GND 2,4 Design to reduce ground path inductance for best performance. * Enhancement mode pseudomorphic High Electron Mobility Transistor. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The The RFMD SPF-5043Z part number is used for identification and comparison purposes only. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. B to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp M151107 PSA4-5043+ Mini-Circuits RS/TH 200904 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 5