Low Noise, High IP3 PSA-5454+ Monolithic Ampliefi r 50 0.05 to 4 GHz The Big Deal CASE STYLE: CA1389 Ultra Low Noise Figure, 0.8 dB High IP3/Low Current, 20mA at +5V Wideband, up to 4 GHz Product Overview Mini-Circuits PSA-5454+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to 4 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive receiver applications. This design operates on a single 5V supply at only 20mA and is internally matched to 50 ohms. Key Features Feature Advantages Ultra Low Noise, 0.8 dB Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise High IP3, 25 dBm Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic range: sensitivity & two-tone spur-free dynamic range At only 20mA, the PSA-5454+ is ideal for remote applications with limited available power or Low Current, 20 mA densely packed applications where thermal management is critical. Operating over a broadband the PSA-5454+ covers the primary wireless communications bands: Broad Band Cellular, PCS, LTE, WiMAX No external matching elements required to achieve the advertised noise and output power over the Internally Matched full band SOT-363 Package Small size, industry standard package Max Input Power, +15dBm Ruggedized design operates up to input powers of +15dBm without the need of an external limiter Low, small signal operating current of 30 mA nominal maintains junction temperatures typically High Reliability below 105C at 85C ground lead temperature Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 1 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.comLow Noise, High IP3 Monolithic Ampliefi r PSA-5454+ 50 0.05 to 4 GHz Product Features Single Positive Supply Voltage, +5V, Id=20mA Ultra Low Noise Figure, 0.8 dB typ. at 1GHz High IP3, 25 dBm typ. 1GHz Gain, 18dB typ. at 1GHz Output Power, up to +14 dBm typ. Generic photo used for illustration purposes only Micro-miniature size SOT-363 package CASE STYLE: CA1389 Aqueous washable +RoHS Compliant Typical Applications The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Cellular ISM GSM WCDMA LTE WiMAX WLAN UNII and HIPERLAN General Description PSA-5454+ is an advanced wide band, high dynamic range, low noise, high IP3, high output power, monolithic amplifier. Manufactured using E-PHEMT* technology enables it to work with a single positive supply voltage. simplified schematic and pin description BIAS GND (1) RF-OUT (6) RF-IN RF-OUT and Vd GND (2) GND (5) RF-IN (3) BIAS (4) Function Pin Description (See Application Circuit, Fig. 3) Number RF IN 3 RF input pin (connect to RF-IN via blocking cap C1 and Pin 4 via L2) RF output pin (connected to RF-out via blocking cap C2 and supply voltage Vd RF-OUT & Vd 6 via RF Choke L1) BIAS 4 Connected to Vs via Rbias. (Connect to ground via C4 & R1) GND 1,2,5 Connections to ground * Enhancement mode pseudomorphic High Electron Mobility Transistor. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. B B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. M151107 C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp PSA-5454+ TH/RS/CP/AM 200428 Mini-Circuits Page 2 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com