+5 to +30 dBm Limiter RLM-23-1WL+ 50 Broadband 100 to 2500 MHz Generic photo used for illustration purposes only Features Maximum Ratings CASE STYLE: CK1246-1 low insertion loss, 0.7 dB typ. Operating Temperature -40C to 85C very low output power 0 dBm typ. at 30 dBm input +RoHS Compliant Storage Temperature -55C to 100C low cost The +Suffix identifies RoHS Compliance. See our web site RF Input Power 1.5W for RoHS Compliance methodologies and qualifications aqueous washable Permanent damage may occur if any of these limits are exceeded. Applications military, hi-rel applications Pin Connections stabilizing generator outputs INPUT 2 reducing amplitude variations OUTPUT 10 protects low noise amplifiers and other GROUND all others devices from ESD or input power damage Outline Drawing PCB Land Pattern Electrical Specifications Parameter Condition Min. Typ. Max. Units Frequency Range 100 2500 MHz Linear Range Max Input Power less than 0.1 dB compression -10 dBm Insertion Loss less than -10 dBm input power 0.7 1.3 dB VSWR less than -10 dBm input power 1.35 1.6 :1 Limiting Range Suggested Layout, Input Power >1dB compression filtered signal frequency +5 +30 dBm Tolerance to be within .002 Output Power 0 dBm Input Power Range (dBm) 5 to 10 0.1 Output/ 1dB Input 10 to 20 0.05 dB/dB 20 to 30 0.1 1 watt pulse 50 sec pw 1kHz duty cycle recovery Recovery Time 8 nsec to within 90% of final value. Response Time -30 to +30 dBm input 50 sec PW 1 kHz duty cycle 2 nsec inch Outline Dimensions ( ) mm AB C D E F G H JK .500 .500 .180 .100 .080 .115 .060 .040 .540 .060 12.70 12.70 4.57 2.54 2.03 2.92 1.52 1.02 13.72 1.52 L M N P Q R S T wt100 .135 .135 .115 .140 .070 .150 .070 grams 2.54 3.43 3.43 2.92 3.56 1.78 3.81 1.78 1.0 Typical Performance Data Freq. I. Loss (dB) VSWR (:1) Power Output Output / 1dB Input (dBm) (MHz) in Linear in Linear Range Range +5 dBm +10 dBm +20 dBm +30dBm +5 to +10 to +20 to Demo Board MCL P/N: TB-613+ at -10 dBm at -10 dBm Input Input Input Input +10 dBm +20 dBm +30 dBm Suggested PCB Layout (PL-343) Input Input Input 100.00 0.13 1.13 -0.06 1.09 3.26 5.95 0.23 0.22 0.27 300.00 0.22 1.18 -0.18 0.95 2.57 3.37 0.23 0.16 0.08 500.00 0.32 1.27 -0.19 0.94 1.76 2.16 0.23 0.08 0.04 700.00 0.40 1.33 -0.25 0.80 1.31 1.26 0.21 0.05 -0.01 900.00 0.43 1.36 -0.30 0.61 0.96 0.65 0.18 0.04 -0.03 1000.00 0.41 1.35 -0.33 0.54 0.74 0.17 0.17 0.02 -0.06 1200.00 0.42 1.31 -0.41 0.37 0.26 -0.28 0.16 -0.01 -0.05 1300.00 0.44 1.27 -0.48 -0.02 0.02 -0.56 0.09 0.00 -0.06 1500.00 0.43 1.20 -0.77 -0.42 -0.58 -1.34 0.07 -0.02 -0.08 1700.00 0.45 1.17 -1.09 -0.84 -1.49 -1.70 0.05 -0.07 -0.02 1900.00 0.54 1.20 -1.54 -1.39 -1.85 -3.11 0.03 -0.05 -0.13 2000.00 0.56 1.23 -1.84 -1.61 -1.99 -3.09 0.05 -0.04 -0.11 2200.00 0.62 1.25 -2.34 -2.23 -3.13 -4.89 0.02 -0.09 -0.18 2300.00 0.70 1.24 -2.53 -2.54 -2.89 -4.34 0.00 -0.04 -0.15 2500.00 0.77 1.16 -3.02 -3.02 -3.69 -8.94 0.00 -0.07 -0.53 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. A C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled M151107 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp RLM-23-1WL+ ED-14241 Mini-Circuits DJ/CP/AM 200501 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2RLM-23-1WL+ RLM-23-1WL+ RLM-23-1WL+ POWER OUTPUT vs. POWER INPUT LOW INPUT POWER INSERTION LOSS 8.0 0.9 6.0 0.8 4.0 0.7 2.0 0.6 0.0 0.5 -2.0 0.4 -4.0 at 100 MHz 0.3 -6.0 at 1300 MHz 0.2 -8.0 at 2500 MHz 0.1 -10.0 0.0 5 10 15 20 25 30 0 500 1000 1500 2000 2500 POWER INPUT (dBm) FREQUENCY (MHz) RLM-23-1WL+ RLM-23-1WL+ POWER OUTPUT vs. FREQUENCY DELTA OUTPUT/DELTA 1dB INPUT 8.0 0.4 6.0 4.0 0.0 2.0 0.0 -2.0 Pwr In=+5 dBm -0.4 -4.0 5 to 10 dBm Pwr In=+10 dBm 10 to 20 dBm -6.0 Pwr In=+20 dBm 20 to 30 dBm -8.0 Pwr In=+30 dBm -0.8 -10.0 0 500 1000 1500 2000 2500 0 500 1000 1500 2000 2500 FREQUENCY (MHz) FREQUENCY (MHz) RLM-23-1WL+ RLM-23-1WL+ INPUT VSWR IN LINEAR RANGE OUTPUT VSWR IN LINEAR RANGE 1.4 1.4 1.3 1.2 1.2 1.0 1.1 0 500 1000 1500 2000 2500 0 500 1000 1500 2000 2500 FREQUENCY (MHz) FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 VSWR POWER OUTPUT (dBm) INSERTION LOSS (dB) POWER OUTPUT (dBm) DELTA OUTPUT (dB/dB) VSWR