TCIHG1550S11111 Molex

Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Product Description Oplinks Tap Coupler/Isolator Hybrid Combination (TCIH) is based on pat- ented athermal platform for optical device. This product is a combination of a partial reflection filter and a polarization insensitive optical isolator that fea - tures ultra low insertion loss, super thermal stability, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. Performance Specificationns TCIHG Series Specifications Single Stage Dual Stage Unit C-band: 1528 ~ 1564 Operating Wavelength Range nm L-band: 1570 ~ 1605 Features Standard Port < 0.8 < 1.0 dB Wide Operating Wavelength Range 1% Tap Ratio: 19.2~21.0 Compact Size 1 Insertion Loss 2% Tap Ratio: 16.2~18.0 Tap Port dB Low Insertion Loss 5% Tap Ratio: 12.2~14.0 10% Tap Ratio: 9.6~10.8 High Isolation Wavelength Dependent Loss < 0.3 < 0.4 dB Ultra Low PDL & PMD Reverse Direction Isolation (over operating > 21 > 38 ps Highly Stable & Reliable wavelength range, 0~70C, all SOP) Epoxy-free Optical Path Polarization Dependent Loss < 0.1 dB Polarization Mode Dispersion < 0.25 < 0.05 dB Directivity > 55 dB Return Loss > 50 dB Maximum Power Handling < 500 mW Applications Fiber Type Corning SMF-28 Fiberoptic Amplifiers Operating Temperature 0 to +70 C CATV Fiberoptic Links Storage Temperature -40 to +85 C System Monitoring 3 Package Dimensions P1: () 5.5 x (L) 34.0 Fiberoptic Instruments mm P2: () 5.5 x (L) 40.0 Transmitters and Fiber Lasers Note: 1 The maximum IL is under all states of polarization and within the full operating temperature and Laboratory R&D wavelength ranges specified. Add 0.3dB on signal port IL for 10% tapping case. 2 All the parameters are excluding connectors. 3 The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom speci- fied. S0072 - R02. 20100603Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250m bare fiber COMM PASS 34.0 mm 5.5 mm 1 COMMON 2 PASS 3 REFLECT TAP 54.0mm P2: 900m loose tube 40.0 mm 5.5 mm 1 COMMON PASS 2 3 REFLECT 60.0mm Ordering Information TCIHG Stage Tap Ratio Connector Type Wavelength Fiber Length* None = 1 1550 nm= 1550 Single Stage = S 1.0 Meter = 1 1% = 1 FC/PC = 2 1585 nm= 1585 Dual Stage = D 1.5 Meters = 5 2% = 2 FC/SPC = 3 5% = 5 2.0 Meters = 2 FC/APC = 4 10% = 0 SC/PC = 5 SC/SPC = 6 Package & Fiber Jacket SC/APC = 7 P1 + 250m bare fiber = 11 ST = 8 P2 + 900m loose tube = 22 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. S0072 - R02. 20100603 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales Oplink.com www.oplink.com