MP2228 High-Efficiency, 2A, 16V, 800kHz Synchronous, Step-Down Converter The Future of Analog IC Technology DESCRIPTION FEATURES The MP2228 is a high-frequency, synchronous, 6V-to-16V Operating Input Range rectified, step-down, switch-mode converter 100m/40m Low R Internal Power DS(ON) with built-in power MOSFETs. It offers a very MOSFETs compact solution to achieve a 2A continuous High-Efficiency Synchronous Mode output current with excellent load and line Operation regulation over a wide input supply range. The Fixed 800kHz Switching Frequency MP2228 has synchronous mode operation for External AAM pin for Power-Save Mode higher efficiency over the output current load Programming range. External Soft-Start OCP Protection and Hiccup Current-mode operation provides fast transient response and eases loop stabilization. Thermal Shutdown Output Adjustable from 0.8V Full protection features include over-current Available in an 8-pin TSOT-23 Package protection and thermal shut down. APPLICATIONS The MP2228 requires a minimal number of readily-available standard external components, Notebook Systems and I/O Power and is available in a space-saving 8-pin Digital Set-Top Boxes TSOT23 package. Flat-Panel Television and Monitors Distributed Power Systems All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION R3 6V - 16V 20 2 5 VIN IN BST 100 95 V =6V IN MP2228 7 90 3.3V/2A VCC 3 SW 85 V =12V IN R4 80 R1 113k 75 R6 40.2k V =16V 1 IN AAM 8.2k 8 70 FB R5 65 10k 6 R2 SS 60 GND 13k C3 55 4 22nF 50 0.01 0.10 1.00 10.00 OUTPUT CURRENT (A) MP2228 Rev. 1.1 www.MonolithicPower.com 1 8/20/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved. MP2228 SYNCHRONOUS STEP-DOWN CONVERTER ORDERING INFORMATION Part Number* Package Top Marking MP2228GJ TSOT-23-8 AGB * For Tape & Reel, add suffix Z (e.g. MP2228GJZ) PACKAGE REFERENCE AAM (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC V ..................................................-0.3V to 17V TSOT-23-8............................. 100..... 55... C/W IN V ...................................................................... SW Notes: -0.3V (-5V for <10ns) to 17V (19V for <10ns) 1) Exceeding these ratings may damage the device. V ........................................................ V +6V BST SW 2) The maximum allowable power dissipation is a function of the maximum junction temperature T (MAX), the junction-to- J All Other Pins....................................-0.3V to 6V ambient thermal resistance , and the ambient temperature JA (2) Continuous Power Dissipation (T = +25C) T . The maximum allowable continuous power dissipation at A A any ambient temperature is calculated by P (MAX) = (T D J ...........................................................1.25W (MAX)-T )/ . Exceeding the maximum allowable power A JA Junction Temperature...............................150C dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Lead Temperature ....................................260C shutdown circuitry protects the device from permanent Storage Temperature................. -65C to 150C damage. 3) The device is not guaranteed to function outside of its (3) Recommended Operating Conditions operating conditions. 4) Measured on JESD51-7, 4-layer PCB. Supply Voltage V ..............................6V to 16V IN Output Voltage V ................0.8V to V x 90% OUT IN Operating Junction Temp. (T ). -40C to +125C J MP2228 Rev. 1.1 www.MonolithicPower.com 2 8/20/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved.