MP2344 26V, 2A, 600kHz, High-Efficiency, Synchronous Step-Down Converter DESCRIPTION FEATURES The MP2344 is a high-efficiency, synchronous, Wide 7.5V to 26V Operating Input Range rectified, step-down, switch-mode converter 2A Load Current with built-in internal power MOSFETs. It offers a 95m/45m Low R Internal Power DS(ON) very compact solution that achieves 2A of MOSFETs continuous output current with excellent load Internal Power-Save Mode for Light Load and line regulation over a wide input supply 600kHz Fixed Switching Frequency at CCM range. Optimized for Low EMI Internal Soft Start The MP2344s switching edge is optimized for low EMI. SW anti-ringing is employed to Over-Current Protection (OCP) and Hiccup address high-frequency radiation EMI issues. Mode Thermal Shutdown Full protection features include over-current Output Adjustable from 3.3V protection (OCP) and thermal shutdown. Available in a TSOT23-6 Package The MP2344 requires a minimal number of The MPL-AL-5050 Inductor Series Matches readily available, standard, external Best Performance components and is available in a space-saving, APPLICATIONS 6-pin TSOT23 package. RF-Enabled Devices Stand-By Power Supply White Goods Flat-Panel Television and Monitors All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. MPS, the MPS logo, and Simple, Easy Solutions are registered trademarks of Monolithic Power Systems, Inc. or its subsidiaries. TYPICAL APPLICATION Efficiency vs. Output Current VOUT = 5V 100 95 90 85 80 75 70 65 Vin=12V 60 Vin=7V 55 Vin=26V 50 0.01 0.1 1 10 LOAD CURRENT (A) MP2344 Rev. 1.1 www.MonolithicPower.com 1 6/9/2020 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved. EFFICIENCY (%)MP2344 26V, 2A, SYNCHRONOUS STEP-DOWN CONVERTER ORDERING INFORMATION Part Number* Package Top Marking MSL Rating MP2344GJ TSOT23-6 See Below 1 * For Tape & Reel, add suffix Z (e.g. MP2344GJZ). TOP MARKING BGT: Product code of MP2344GJ Y: Year code PACKAGE REFERENCE TOP VIEW IN 1 6 FB SW 2 5 VCC GND 3 4 BST TSOT23-6 PIN FUNCTIONS Pin Name Description Supply voltage. The MP2344 operates from a +7.5V to +26V input rail. C1 is needed to 1 IN decouple the input rail. Connect using wide PCB traces. 2 SW Switch output. Connect using wide PCB traces. System ground. GND is the reference ground of the regulated output voltage. GND 3 GND requires special consideration during PCB layout. Connect GND with copper traces and vias. Bootstrap. Connect a capacitor between SW and BST to form a floating supply across the 4 BST high-side switch driver. Internal LDO output. Decouple VCC with a 0.1F to 0.22F capacitor. VCC can be 5 VCC biased by an external 5V output voltage through a diode. Feedback. An external resistor divider from the output to GND tapped to FB sets the output voltage. To prevent a current-limit runaway during a short-circuit fault condition, the 6 FB frequency foldback comparator lowers the oscillator frequency when the FB voltage is below 396mV. MP2344 Rev. 1.1 www.MonolithicPower.com 2 6/9/2020 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved.