MP44014GS

MP44014 Boundary Mode PFC Controller The Future of Analog IC Technology FEATURES DESCRIPTION Boundary Conduction Mode PFC Controller The MP44014 is a boundary conduction mode for Pre-Regulator PFC controller that provides simple, high- Zero-Crossing Compensation to Minimum performance, active power factor correction THD of the AC Input Current using minimal external components. Precise Adjustable Output Over-Voltage The output voltage is regulated accurately by a Protection high-performance voltage mode amplifier with Ultra-Low (15 A) Start-U p Current an accurate internal voltage reference. Low Quiescent Current (0.46uA) at OVP Condition The precise, adjustable output over-voltage On-Chip Filter on Current Sense Pin protection greatly enhances system reliability. Disable Function on ZCS Pin The on-chip R/C filter on the current sense pin -750mA/+800mA Peak Gate Drive Current can potentially eliminate the external R/C filter. Available in SOIC-8 Packages The extremely low start-up current, quiescent APPLICATIONS current, and disable function reduces power consumption, resulting in excellent efficiency Offline Adaptors performance. Electronic Ballast LLC Front End The MP44014 is available in a SOIC-8 package. Other PFC Pre-Regulators All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. Other patents pending. TYPICAL APPLICATION L1 R3 D2 R10 C2 R4 D1 C4 R6 D3 R5 R1 C6 C5 Q1 U1 R7 FB ZCS COMP C8 VCC C1 GATE M44014 MULT CS GND R11 R8 R2 C3 R9 C7 MP44014 Rev. 1.01 www.MonolithicPower.com 1 11/10/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved. MP44014 BOUNDARY MODE PFC CONTROLLER ORDERING INFORMATION Part Number Package Top Marking SOIC-8 MP44014GS* See Below * For Tape & Reel, add suffix Z (e.g. MP44014GSZ) TOP MARKING MP44014: Part number LLLLLLLL: Lot number MPS: MPS prefix Y: Year code WW: Week code PACKAGE REFERENCE 1 FB VCC 8 2 COMP 7 GATE 3 MULT GND 6 45ZCS CS (1) (5) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply voltage (VCC) .............. -0.5V to self limit SOIC-8 ....................................90 ...... 45... C/W (2) Analog inputs and outputs ..........-0.3V to 6.5V NOTES: ZCS max. current......................-2.5mA to 10mA 1) Exceeding these ratings may damage the device. (3) Continuous power dissipation (T = +25C) A 2) Except ZCS pin, which is self limited. 3) The maximum allowable power dissipation is a function of the SOIC-8....................................................... 1.4W maximum junction temperature T(MAX), the junction-to- J Junction temperature ..150 C ambient thermal resistance , and the ambient temperature JA Lead temperature (solder) ........................260C T . The maximum allowable continuous power dissipation at A any ambient temperature is calculated by Storage temperature................ -55C to +150 C D(MAX)=(T (MAX)-T )/ . Exceeding the maximum J A JA allowable power dissipation will produce an excessive die (4) Recommended Operating Conditions temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the Supply voltage (VCC) ....................13.4V to 22V device from permanent damage. Analog inputs and outputs .............-0.3V to 6.5V 4) The device is not guaranteed to function outside of its operating conditions. Operating junction temp. (T )... -40C to +125C J 5) Measured on JESD51-7, 4-layer PCB. MP44014 Rev. 1.01 www.MonolithicPower.com 2 11/10/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2015 MPS. All Rights Reserved.