RFM products are now Murata products. SF2024D-1 Designed for SDARS Receiver IF Application Low Insertion Loss 467.751 MHz 3.8 X 3.8 X 1.0 mm Surface-Mount Case Differential Input and Output SAW Filter Complies with Directive 2002/95/EC (RoHS) Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 C Suitable for lead-free soldering - Max Soldering Profile 260C for 30 s SM3838-8 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 467.704 467.751 467.798 MHz C 1 Insertion Loss IL 13 15.5 dB Amplitude Ripple (p-p) fc-6.250 to fc-4.3925 MHz 0.7 2.0 fc-4.3925 to fc-2.535 MHz 0.8 2.0 fc-2.5350 to fc-0.025 MHz 0.9 2.0 dB fc+0.025 to fc+2.535 MHz 1.1 2.0 1, 2 fc+2.5350 to fc+4.3925 MHz 1.1 2.0 fc+4.3925 to fc+6.250 MHz 1.2 2.0 Pass bandwidth of -2.0dB centered at fc 13.0 MHz Pass bandwidth of -3 dB Low Side Attenuation between 455.751 to 457.251 MHz (fc-10.5 MHz) 32 Low Side Attenuation F<455.751 MHz 32 dB High Side Attenuation between 476.751 to 479.751 MHz (fc+9.0 MHz) 20 High Side Attenuation F>479.751 MHz 32 Temperature Coefficient of frequency -18 ppm/K Delay Ripple (p-p) fc-6.250 to fc-4.3925 MHz 1, 2, 3 70 110 fc-4.3925 to fc-2.535 MHz 70 140 fc-2.5350 to fc-0.025 MHz 75 120 ns fc+0.025 to fc+2.535 MHz 80 120 fc+2.5350 to fc+4.3925 MHz 80 100 fc+4.3925 to fc+6.250 MHz 85 140 Source Impedance ZS 150 Load Impedance ZL 150 Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint 6 Lid Symbolization (YY=year, WW=week, S=shift) See note 4 619 YWWS Operating Temperature -40 +85 C Notes: 5. Tape and Reel Standard Per ANSI / EIA 481. 1. Unless noted otherwise, all specifications apply over the operating 6. US and international patents may apply. temperature range with filter soldered to the specified demonstration 7. Murata, Murata stylized logo, and Murata N.A., Inc. are registered board with impedance matching to 50 and measured with 50 trademarks of Murata Manufacturing Co., Ltd. network analyzer. 8. Copyright 2015, Murata N.A., Inc. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Electrostatic Sensitive Device. Observe precautions for handling. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Applica- tion Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 1 of 5 2010-2015 by Murata Electronics N.A., Inc. SF2024D-1C (R) 06/03/15 www.murata.com467.751 MHz SAW Filter 2 of 5 2010-2015 by Murata Electronics N.A., Inc. SF2024D-1C (R) 06/03/15 www.murata.com