XTCLH19M200TJJC3P0 Murata

Document No. JGU43-0374 P. 1/15 Specification of Crystal Oscillator Issue Date : June 13, 2019 1. Part Number Murata Part Number XTCLH19M200TJJC3P0 XTCLH19M200TJJC3P1 XTCLH19M200TJJC3P2 (Frequency: 19.200000MHz/ Size: 5.0 x 3.2mm) 2. Scope GPS This product specification is applied to the crystal oscillator used for the communication system, GPS and so on. Please contact us when using this product for any other applications than described in the above 3. Appearance and Dimensions 3-1 : Appearance : No illegible marking. No visible dirt. 3-2 : 7 Dimensions of component : Please refer to item 7 for component dimensions. 4. Rating Item Specification 4-1 : Vcc -0.6 +6.0V Supply Voltage: Vcc 4-2 : Vc *1 -0.6 Vcc+0.6V Control Voltage: Vc *1 4-3 -40 +85 Storage Temperature Range *1 (Vcc) And not to exceed the maximum value of Rating Supply Voltage. Murata Manufacturing Co.,Ltd. Document No. JGU43-0374 P. 2/15 5. Electrical Characteristics Item Specification 5-1 19.200000MHz Nominal Frequency 5-2 -40 +85 Operating Temperature Range 5-3 : Vcc DC:+3.0V 5% Supply Voltage : Vcc 5-4 2.0mA /max. Current Consumption 5-5 *2 0.8Vp-p /min. Output Level *2 5-6 (10k //10pF)10% Load Condition 5-7 DC Output Wave Clipped Sine Wave DC coupling) 5-8 Frequency Characteristics 5-8-1 0.2ppm /max.(-40 +85 ) *3 /from initial value +25 Frequency Shift by Temperature *3 5-8-2 0.1ppm /max. (DC:+3.0V 5%) Frequency Voltage Coefficient 5-8-3 0.05ppm /max. (10k //10pF)10% Frequency Load Coefficient 5-8-4 0.5ppm /max. (1year.) ( +25 2 ) Frequency Aging 5-8-5 *4 1.0ppm /max. (2times.) Frequency Tolerance after Reflow-soldering *4 5-9 *5 0.5ppm /max. ( +25 2 ,Vc:+1.5V) Frequency Tolerance *5 5-10 3.0 ppm /min. Voltage Control Range 6.0 ppm /max. (Vc:+1.5V 1.0V) /Positive. Murata Manufacturing Co.,Ltd.