ALUMINUMELECTROLYTICCAPACITORS Chip Type, Low Impedance series CD Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Low Low Applicable to automatic mounting machine fed with carrier tape. CL UD Impedance CD Impedance Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range 55 to +105C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 1 to 3300F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes application of rated voltage, leakage current is not more than 0.01 CV or 3 (A), whichever is greater. Measurement frequency : 120Hz at 20C Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Tangent of loss angle (tan ) tan (MAX.) 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.07 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 2 2 2 2 2 2 2 2 2 Z25C / Z+20C Stability at Low Temperature Impecance ratio Z40C / Z+20C 3 3 3 3 3 3 3 3 3 ( ) ZT / Z20 MAX. Z55C / Z+20C 4 4 4 3 3 3 3 3 3 Capacitance Change Within 30% of the initial capacitance value The specifications listed at right shall be met when the 200% or less than the initial specified value capacitors are restored to 20C after the rated voltage is tan Endurance applied for 5000 hours (2000 hours for L 10 mm: 50V 300% or less than the initial specified value for 63V or more or less, and for L 10mm: 63V or more) at 105C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at Shelf Life 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance Change Within 10% of the initial capacitance value Resistance to soldering maintained at 250C. The capacitors shall meet the characteristic tan Less than or equal to the initial specified value heat requirements listed at right when they are removed from the Leakage current Less than or equal to the initial specified value plate and restored to 20C. Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 100F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ( ) Positive 4 to 8 6.2 Plastic platform U C D 1 C 1 0 1 M C L 1 G S Voltage ( j : 6.3V ) 0.3 MAX. C0.2 Package code Series 1 Trade mark Size Package Code 4 to 10 Taping GS 12.5 to 18 Taping MS 12.5 to 18 Tray ZD Size code L0.3 Configuration Lot No. Capacitance Negative H Capacitance tolerance (20%) D Code 1: Size 8 6.2 only 4 to 6.3 CL Rated capacitance (100F) ( ) Positive 8 10, 10 8 (6.2L) CL Plastic platform Rated voltage (16V) Voltage (E : 25V) 10(7.7L) CL 0.3 MAX. C0.2 Series Series name 8 (10L) Trade mark NL 10(10L,13.5L) Type 12.5 to 18 NQ D L (mm) 4 5.8 5 5.8 6.3 5.8 6.3 7.7 8 6.2 8 10 10 7.7 10 10 A 1.8 2.1 2.4 2.4 3.3 2.9 3.2 3.2 2 Pressure L0.5 B 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 relief vent Negative C 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 Lot No. Capacitance H 2 : Except : 10 7.7L E 1.0 1.3 2.2 2.2 2.3 3.1 4.5 4.5 Positive (12.5 to 18) L 5.8 5.8 5.8 7.7 6.2 10 7.7 10 Plastic platform Voltage H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 C0.2 Trade mark 0.3 MAX. Lot No. D L 10 13.5 12.5 13.5 16 16.5 18 16.5 A 3.2 4.8 5.4 6.4 B 10.3 13.6 17.1 19.1 C 10.3 13.6 17.1 19.1 E 4.5 4.0 6.3 6.3 13.5 L 13.5 16.5 16.5 Pressure L1.0 relief vent H 0.8 to 1.1 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 Negative H Capacitance Series Voltage 8 10L, 10 10L, 12.5 13.5L, 16 16.5L, 18 16.5L : V 6.3 10 16 25 35 50 63 80 100 The vibration structure-resistant product is also available upon request, please ask for details. Code j A C E V H J K 2A Dimension table in next page. CAT.8100D n i c h i c o n 330 F A2 A2 CD 50V 220E 47 j H1015 CD CD D0.5 D0.5 D0.5 B0.2 B0.2 B0.2 0.5 MAX. 0.5 MAX. 0.5 MAX. E E E A0.2 A0.2 A0.2 A0.2 A0.2 A0.2ALUMINUMELECTROLYTICCAPACITORS series CD Dimensions V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H Cap. (F) 1 010 4 5.8 2.70 60 4 5.8 2.70 60 2.2 2R2 4 5.8 2.70 60 3.3 3R3 4.7 4R7 4 5.8 1.35 90 4 5.8 2.70 60 4 5.8 1.35 90 5 5.8 1.50 90 10 100 4 5.8 1.35 90 4 5.8 1.35 90 5 5.8 0.70 160 6.3 5.8 0.86 170 15 150 4 5.8 1.35 90 5 5.8 0.70 160 4 5.8 1.35 90 22 220 4 5.8 1.35 90 4 5.8 1.35 90 5 5.8 0.70 160 5 5.8 0.70 160 6.3 5.8 0.86 170 5 5.8 0.70 160 27 270 4 5.8 1.35 90 5 5.8 0.70 160 5 5.8 0.70 160 6.3 5.8 0.36 240 4 5.8 1.35 90 5 5.8 0.70 160 6.3 7.7 0.66 195 33 330 5 5.8 0.70 160 6.3 5.8 0.36 240 6.3 5.8 0.36 240 200 5 5.8 0.70 160 6.3 5.8 0.36 240 8 6.2 0.63 4 5.8 1.35 90 5 5.8 0.70 160 6.3 7.7 0.66 195 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 5.8 0.36 240 47 470 5 5.8 0.70 160 6.3 5.8 0.36 240 8 6.2 0.63 200 56 560 5 5.8 0.70 160 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 5.8 0.36 240 68 680 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 7.7 0.32 290 5 5.8 0.70 160 6.3 7.7 0.32 290 6.3 7.7 0.32 290 8 10 0.32 350 100 101 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 5.8 0.36 240 8 6.2 0.26 300 8 10 0.16 600 10 7.7 0.36 330 8 10 0.16 600 8 10 0.16 600 150 151 6.3 5.8 0.36 240 6.3 5.8 0.36 240 6.3 7.7 0.32 290 10 10 0.16 700 10 7.7 0.18 600 10 7.7 0.18 600 6.3 7.7 0.32 290 6.3 7.7 0.32 290 8 10 0.16 600 8 10 0.16 600 220 221 6.3 5.8 0.36 240 10 10 0.16 700 8 6.2 0.26 300 8 6.2 0.26 300 10 7.7 0.18 600 10 7.7 0.18 600 6.3 7.7 0.32 8 10 0.16 8 10 10 13.5 0.14 800 290 600 0.16 600 8 10 0.16 600 10 10 0.08 850 330 331 8 6.2 0.26 300 10 7.7 0.18 600 10 7.7 0.18 600 12.5 13.5 0.12 900 390 12.5 13.5 0.12 900 391 8 10 0.16 600 8 10 0.16 600 8 10 0.16 600 10 13.5 0.08 950 470 471 10 10 0.08 850 16 16.5 0.073 1610 10 7.7 0.18 600 10 7.7 0.18 600 10 7.7 0.18 600 12.5 13.5 0.08 1100 8 10 0.16 600 680 681 10 10 0.08 850 10 10 0.08 850 10 13.5 0.08 950 12.5 13.5 0.08 1100 16 16.5 0.073 1610 10 7.7 0.18 600 1000 102 8 10 0.16 600 10 10 0.08 850 10 13.5 0.08 950 12.5 13.5 0.08 1100 16 16.5 0.035 1800 1500 152 10 10 0.08 850 10 13.5 0.08 950 12.5 13.5 0.08 1100 Case size 2200 222 10 13.5 0.08 950 12.5 13.5 0.08 1100 16 16.5 0.035 1800 Rated Impedance D L ripple (mm) 3300 332 12.5 13.5 0.08 1100 V 63 80 100 Code 1J 1K 2A Cap. (F) 3.3 3R3 5 5.8 5.00 25 4.7 4R7 5 5.8 3.00 50 6.3 5.8 3.00 40 6.3 7.7 2.40 60 10 100 6.3 5.8 1.50 80 8 6.2 2.40 60 6.3 7.7 1.20 120 22 220 8 10 1.30 130 8 10 1.30 130 8 6.2 1.20 120 33 330 8 10 0.65 250 8 10 1.30 130 10 10 0.70 200 47 470 8 10 0.65 250 10 10 0.70 200 12.5 13.5 0.32 500 68 680 10 10 0.35 400 12.5 13.5 0.32 500 12.5 13.5 0.32 500 100 101 10 10 0.35 400 12.5 13.5 0.32 500 16 16.5 0.17 793 150 151 12.5 13.5 0.16 800 12.5 13.5 0.32 500 16 16.5 0.17 793 220 221 12.5 13.5 0.16 800 18 16.5 0.15 917 330 331 16 16.5 0.17 793 18 16.5 0.15 917 Case size 470 471 16 16.5 0.082 1410 18 16.5 0.15 917 Rated D L Impedance ripple (mm) 680 681 18 16.5 0.08 1690 Max. Impedance ( ) at 20C 100kHz, Rated ripple current (mArms) at 105C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. Recommended land size, soldering by refrow are given Frequency coefficient of rated ripple current in page 18, 19. Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Please refer to page 3 for the minimum order quantity. Coefficient 0.35 0.50 0.64 0.83 1.00 CAT.8100D