UHC1E101MED Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C HC series Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC). Low HD Impedance HC Specifications ltem Performance Characteristics Temperature Range 40 to +105C Category Rated Voltage Range 6.3 to 35V F Rated Capacitance Range 4.7 to 1000 Capacitance Tolerance 20% at 120Hz, 20C After 2 minutes application of rated voltage, leakage current is less than 0.01CV or 3 ( A), whichever is greater. Leakage Current Rated voltage (V) 6.3 10 16 25 35 120Hz 20C Tangent of loss angle (tan ) tan (MAX.) 0.15 0.13 0.12 0.10 0.10 Rated voltage (V) 6.3 10 16 25 35 120Hz Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z40C / Z+20C 22222 The specifications listed at right shall be met when the Capacitance change Within 20% of the initial capacitance value capacitors are restored to 20C after D.C. bias plus 200% or less than the initial specified value Endurance rated ripple current is applied for 2000 hours (1000 tan hours for D=4, 5 and 6.3) at 105C, the peak voltage Leakage current Less than or equal to the initial specified value shall not exceed the rated voltage. Marking Printed with white color letter on black sleeve. Type numbering system (Example : 10V 470F) Radial Lead Type d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 910 11 U H C 1 A 4 7 1 M P D Configuration Capacitance tolerance ( 20%) Rated capacitance (470 F) Pressure Rated voltage (10V) relief vent + MIN MIN MAX. 15 4 L (6.3up) Series name (No pressure relief vent for 7mmL products) Type Configuration Pb-free leadwire D Pb-free PET sleeve (mm) 4 (L = 7) 1.0 D 4 5 6.3 8 10 5 DD (L 11) 1.5 6.3 (7L) P 1.5 2.0 2.5 3.5 5.0 6.3 (11L) ED 0.5 d 0.45 0.45 0.6 0.6 (0.45) 8 10 PD ( ) : Applied to 7mmL products Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Y + 0.5 MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS HC series Standard Ratings V (Code) 6.3 (0J) 10 (1A) 16 (1C) Impedance Rated ripple Impedance Rated ripple Impedance Rated ripple Case size Case size Case size Item D L ( ) MAX. D L ( ) MAX. D L ( ) MAX. (mArms) (mArms) (mArms) (mm) (mm) (mm) Cap.(F) 20C / 100kHz 105C / 100kHz 20C / 100kHz 105C / 100kHz 20C / 100kHz 105C / 100kHz Code 22 220 4 7 0.49 230 5 7 0.26 350 33 330 4 7 0.48 230 5 7 0.26 350 5 7 0.26 350 47 470 5 7 0.26 350 5 7 0.26 350 6.3 7 0.15 480 100 101 6.3 7 0.15 480 6.3 7 0.15 480 6.3 11 0.078 640 220 221 6.3 11 0.077 640 8 11.5 0.044 910 8 11.5 0.044 910 330 331 8 11.5 0.043 910 8 11.5 0.043 910 10 12.5 0.030 1230 470 471 8 11.5 0.043 910 10 12.5 0.030 1230 10 16 0.025 1650 1000 102 10 16 0.024 1650 V (Code) 25 (1E) 35 (1V) Impedance Rated ripple Impedance Rated ripple Case size Case size Item D L ( ) MAX. (mArms) D L ( ) MAX. (mArms) (mm) (mm) Cap. (F) Code 20C / 100kHz 105C / 100kHz 20C / 100kHz 105C / 100kHz 4.7 4R7 4 7 0.64 230 10 100 4 7 0.52 230 5 7 0.33 350 22 220 5 7 0.27 350 6.3 7 0.17 480 33 330 6.3 7 0.16 480 6.3 7 0.16 480 47 470 6.3 7 0.15 480 6.3 11 0.089 640 11 11.5 100 101 6.3 0.078 640 8 0.048 910 220 221 10 12.5 0.031 1230 10 16 0.026 1650 330 331 10 16 0.026 1650 Frequency coefficient of rated ripple current Frequency 120Hz 1kHz 10kHz 100kHz Cap. (F) 4.7 to 33 0.40 0.68 0.90 1.00 0.47 0.75 0.95 1.00 47 to 330 0.85 470 to 1000 0.55 0.98 1.00 CAT.8100Y