RE30E-1000-213-1 Nidec Copal

RE30E OPTICAL ENCODERS FEATURES RoHS compliant With temp. compensation circuit With zero index signal Power supply voltage is for 5 ~ 12 V, 24V Economy type RoHS compliant PART NUMBER DESIGNATION RE30E - 100 - 2 1 3 - 1 Series name Output connection 1Cable wire Resolution (P/R) Input voltage 100, 200, 300, 360, 400, 500, 600, 800, 900, 1000, 1024 35 ~ 12 V 45 ~ 12 V Open collector 824 V A24 V Open collector Output phase Output phase Z 2A & B 1Provided LIST OF PART NUMBERS Input voltage Item Resolution 5 ~ 12 V 5 ~ 12 V Open collector 24 V 24 V Open collector 100 (P/R) RE30E-100-213-1 RE30E-100-214-1 RE30E-100-218-1 RE30E-100-21A-1 200 (P/R) RE30E-200-213-1 RE30E-200-214-1 RE30E-200-218-1 RE30E-200-21A-1 300 (P/R) RE30E-300-213-1 RE30E-300-214-1 RE30E-300-218-1 RE30E-300-21A-1 360 (P/R) RE30E-360-213-1 RE30E-360-214-1 RE30E-360-218-1 RE30E-360-21A-1 400 (P/R) RE30E-400-213-1 RE30E-400-214-1 RE30E-400-218-1 RE30E-400-21A-1 500 (P/R) RE30E-500-213-1 RE30E-500-214-1 RE30E-500-218-1 RE30E-500-21A-1 600 (P/R) RE30E-600-213-1 RE30E-600-214-1 RE30E-600-218-1 RE30E-600-21A-1 800 (P/R) RE30E-800-213-1 RE30E-800-214-1 RE30E-800-218-1 RE30E-800-21A-1 900 (P/R) RE30E-900-213-1 RE30E-900-214-1 RE30E-900-218-1 RE30E-900-21A-1 1000 (P/R) RE30E-1000-213-1 RE30E-1000-214-1 RE30E-1000-218-1 RE30E-1000-21A-1 1024 (P/R) RE30E-1024-213-1 RE30E-1024-214-1 RE30E-1024-218-1 RE30E-1024-21A-1 Verify the above part numbers when placing orders. The products indicated by mark are manufactured upon receipt of order basis.RE30E OPTICAL ENCODERS STANDARD SPECIFICATIONS Electrical characteristics Mechanical characteristics Input voltage DC5 ~ 12 V 10 % DC24 V 10 % Starting torque 0.29 mNm 3 gfcm maximum 2 Input current 50 mA maximum Inertia 2 gcm maximum Output wave form Radial 19.6 N 2 kgf maximum Square wave Shaft loading (When mounting) Output phases A, B, Z Axial 9.81 N 1 kgf maximum 100, 200, 300, 360, 400, 500 Resolution Net weight Approx. 70 g 600, 800, 900, 1000, 1024 90 45 Phase difference of outputs A & B 10 kHz (100 P/R), 20 kHz (200P/R) Environmental characteristics 25 kHz (300 ~ 500 P/R), 60 kHz (600 P/R) Maximum frequencys response 80 kHz (800 P/R), 90 kHz (900P/R) Operating temp. range 0 ~ 70 C 100 kHz (1000 ~ 1024 P/R) 1 (High) (Vcc 1) V min. (Vcc 2) V min. Storage temp. range 20 ~ 80 C Output signal 0 (Low) + 0.5 V max. + 1.0 V max. Protection grade IP40 Output impedance 2.2 k Light source LED RELIABILITY TEST The output wave form shall satisfy the STANDARD SPECIFICATIONS after the following tests. Test item Test conditions 2 Amplitude : 1.52 mm or 98.1 m/s (10 G) whichever is smaller. Vibration Power OFF 10 ~ 500 Hz excursion 0.25 h/cycle, 8 cycles each for X, Y, Z, directions. 2 Shock Power OFF 3 times each in 6 directions (X, Y, Z) at 490 m/s (50 G), 11 ms. 80 C 96 h Power OFF High temperature exposure 70 C 96 h Power ON (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) Power OFF 20 C 96 h Low temperature exposure Power ON 0 C 96 h (To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and Humidity Power OFF humidity after the test.) To be done 10 cycles with the following condition Thermal shock Power OFF (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) 80 C 1 h 20 C 1 h