ACT102H-600D,118

ACT102H-600D AC Thyristor power switch 21 August 2017 Product data sheet 1. General description An AC Thyristor power switch with very high noise immunity and over-voltage protection configured for negative gate triggering in a SOT96-1 (SO8) small surface-mountable plastic package 2. Features and benefits Exclusive negative gate triggering Full cycle AC conduction High noise immunity Remote gate separates the gate driver from the effects of the load current Surface-mountable package Very sensitive gate for lowest gate trigger current Safe clamping of low energy over-voltage transients Self-protective turn-on during high energy voltage transients 3. Applications Fan motor circuits Pump motor circuits Lower-power highly inductive, resistive and safety loads 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V repetitive peak off- - - 600 V DRM state voltage I RMS on-state current full sine wave T 100 C Fig. 1 - - 0.2 A T(RMS) amb Fig. 2 I non-repetitive peak on- full sine wave T = 25 C - - 8.8 A TSM j(init) state current t = 16.7 ms p full sine wave T = 25 C - - 8 A j(init) t = 20 ms Fig. 3 Fig. 4 p T junction temperature - - 125 C j V peak pulse voltage T = 25 C non-repetitive, off-state - - 2 kV PP j Fig. 5 Static characteristics I gate trigger current V = 12 V I = 100 mA LD+ G- 0.5 - 5 mA GT D T T = 25 C Fig. 7 jWeEn Semiconductors ACT102H-600D AC Thyristor power switch Symbol Parameter Conditions Min Typ Max Unit V = 12 V I = 100 mA LD- G- 0.5 - 5 mA D T T = 25 C Fig. 7 j I holding current V = 12 V T = 25 C Fig. 9 - - 20 mA H D j V on-state voltage I = 0.3 A T = 25 C Fig. 10 - - 1.2 V T T j V clamping voltage I = 0.1 mA t = 1 ms T = 125 C 650 - - V CL CL p j Dynamic charateristics dV /dt rate of rise of off-state V = 402 V T = 125 C (V = 67% 300 - - V/s D DM j DM voltage of V ) exponential waveform gate DRM open circuit Fig. 11 dI /dt rate of change of V = 400 V T = 125 C I = 1 A 0.15 - - A/ms com D j T(RMS) commutating current dV /dt = 15 V/s gate open circuit com Fig. 12 Fig. 13 5. Pinning information Table 2. Pinning information Pin Symbol Description Simplified outline Graphic symbol 1 n.c. not connected 8 5 LD 2 LD Load G 3 n.c. not connected CM 4 n.c. not connected 001aaj924 1 4 5 G Gate SO8 (SOT96-1) 6 CM Common 7 CM Common 8 n.c. not connected 6. Ordering information Table 3. Ordering information Type number Package Name Description Version ACT102H-600D SO8 plastic small outline package 8 leads body width 3.9 mm SOT96-1 ACT102H-600D All information provided in this document is subject to legal disclaimers. WeEn Semiconductors Co., Ltd. 2017. All rights reserved Product data sheet 21 August 2017 2 / 13