HEF4052B-Q100 Dual 4-channel analog multiplexer/demultiplexer Rev. 2 11 September 2014 Product data sheet 1. General description The HEF4052B-Q100 is a dual 4-channel analog multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional analog switches, each with one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common input/output (nZ). With E LOW, one of the four switches is selected (low-impedance ON-state) by S1 and S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 and S2. If break before make is needed, then it is necessary to use the enable input. V and V are the supply voltage connections for the digital control inputs (S1 and S2, DD SS and E). The V to V range is 3 V to 15 V. The analog inputs/outputs (nY0 to nY3, and DD SS nZ) can swing between V as a positive limit and V as a negative limit. V V may DD EE DD EE not exceed 15 V. Unused inputs must be connected to V , V , or another input. For DD SS operation as a digital multiplexer/demultiplexer, V is connected to V (typically EE SS ground). V and V are the supply voltage connections for the switches. EE SS This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics ESD protection: MIL-STD-833, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 ) Complies with JEDEC standard JESD 13-B 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gatingHEF4052B-Q100 Nexperia Dual 4-channel analog multiplexer/demultiplexer 4. Ordering information Table 1. Ordering information All types operate from 40 C to +125 C. Type number Package Name Description Version HEF4052BT-Q100 SO16 plastic small outline package 16 leads body width 3.9 mm SOT109-1 HEF4052BTT-Q100 TSSOP16 plastic thin shrink small outline package 16 leads body width 4.4 mm SOT403-1 5. Functional diagram V DD 16 13 1Z 12 1Y0 14 1Y1 15 1Y2 10 S1 11 1Y3 LOGIC 1 - OF - 4 LEVEL DECODER CONVERSION 1 9 2Y0 S2 5 2Y1 6 E 2 2Y2 4 2Y3 3 2Z 8 7 mnb042 V V SS EE Fig 1. Functional diagram nYn V V DD DD nZ V EE 001aak604 Fig 2. Schematic diagram (one switch) HEF4052B Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 2 11 September 2014 2 of 21