E3X-HD11 2M Omron

Light intensity Smart Fiber Amplifier Unit E3X-HD CSM E3X-HD DS E 7 3 Easy and optimum settings for anyone Smart Fiber Amplifier Unit with Long-term Stable Detection Equipped with Smart Tuning, which automatically configures the settings to their optimum values with the press of a single button. Highly usable design enables anyone to configure the settings easily. Detects dirt, vibrations, and LED deterioration, and automatically compensates the incident level and the light intensity. Unparalleled best-in-class power provides stable detections for low- reflective workpieces and large workpieces (equipped with GIGA RAY II). Refer to the Fiber Sensors Technical Guide and Safety Precautions on page 9. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Features Easy Indications Greater operability and visibility Visibility is improved with digital displays and visible indicators. are realized by a universal design New Concept: Visible Indicators LD DPC ST Operations Operation mode Flashing indicator Indicates that the Symbolic buttons are easy to remember anywhere even for operators overseas. indicator to prevent enables preventive optimum settings incorrect settings. maintenance. have been made. LD DPC ST O OUT U indicator T Threshold (green) Incident level (red) TUNE UP DOWN MODE L/D Compatibility for easy operation and incorrect operation prevention. Smart Tuning Smart tuning for the optimum settings with just one button. Buttons are arranged in a straight line. Smart Tuning Automatically configure the settings to their Pleasing operation even with gloves on. optimum values with the press of a single button. Hard to operate. With workpiece Without workpiece Settings are Finger gets caught. simultaneously completed. Conventional Models E3X-HD Sliding switches Pushbutton switches Incident level adjustment Arc Design with workpiece (no sliding switches) A strong accent line gives a Threshold setting Press only twice. (Set to intermediate value compact look to improve between the incident levels equipment design with and without a workpiece. ) Incident level adjustment without workpiece Stable Long-term stable detection with no maintenance Always ON Long-term stability APC Smart Power Control (AUTO POWER Maintenance-free operation by double compensation of light intensity CONTROL) and incident level With APC Automatically Without APC compensate light LED Vibration intensity Aged Dirt Time deterioration LL DD DPCDPCC STST Incident level Compen- Compen- Compen- OO Decreased UU DPC TT sated. sated. sated. LD DPC ST 5050000009999999999999999 No MaintenanceNo Maintenance O Target value Flashes when U CompensatedCompensated (DYNAMIC POWER T (displayed compensation is 50009000 CONTROL) no longer possible. incident level) Automatically Smart Power DPC Setting value Control compensate (threshold value) incident level + Time Light intensity compensation Incident level compensation 1E3X-HD Ordering Information Fiber Amplifier Units Standard models (Dimensions page 12) Models Appearance Connecting method NPN output PNP output Pre-wired (2 m) E3X-HD11 2M E3X-HD41 2M Wire-saving Connector E3X-HD6 E3X-HD8 M8 Connector E3X-HD14 E3X-HD44 Model for Sensor Communications Unit (Dimensions page 12) Appearance Model Applicable Sensor Communications Unit E3X-ECT E3X-HD0 E3X-CRT Accessories (sold separately) Wire-saving connectors (Required for models for Wire-saving Connectors.) Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. * Protective stickers: provided. Type Appearance Cable length Number of conductors Models Master 3 E3X-CN11 Connector 2 m Slave 1 E3X-CN12 Connector Sensor I/O Connectors (Required for models with M8 Connectors.) Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. Size Cable Appearance Cable type Models 2 m XS3F-M421-402-A Straight 5 m XS3F-M421-405-A M8 Standard 4-wire 2 m XS3F-M422-402-A L-shaped 5 m XS3F-M422-405-A Mounting Bracket DIN Track A Mounting Bracket is not provided with the Fiber Amplifier Unit and must be A Din Track is not provided with the Fiber Amplifier Unit and must be ordered ordered separately as required. separately as required. Appearance Model Quantity Appearance Type Models Quantity Shallow type, total length: 1 m PFP-100N Shallow type, total length: 0.5 m 1 PFP-50N E39-L143 1 Deep type, total length: 1 m PFP-100N2 End Plate Two End Plates are provided with the Sensor Communications Unit. End Plates are not provided with the Fiber Amplifier Unit and must be ordered separately as required. Appearance Model Quantity PFP-M 1 2