G3VM-352J

G3VM-352J MOS FET Relays Two Channels and an 8-pin SOP Package in 350-V Load Voltage Series. Thin Mini Flat Type and Small Outline Package MOS FET Relay with a Height of 2.1 mm, Incorporating a MOS FET Optically Coupled with an Infrared LED Continuous load current of 110 mA. RoHS compliant Note: The actual product is marked differently from the image shown here. Application Examples Terminal Arrangement/Internal Connections Semiconductor test equipment 876 5 Test & Measurement equipment Communication equipment OMRON logo Model name Data loggers Pin 1 mark LOT.No. 932 1 2 3 4 Note: The actual product is marked differently from the image shown here. List of Models Minimum package quantity Load voltage Package type Contact form Terminals Model (peak value) * Number per tube Number per tape and reel G3VM-352J 50 - 2a SOP8 Surface-mounting Terminals 350 V (DPST-NO) G3VM-352J (TR) -2,500 * The AC peak and DC value are given for the load voltage. Absolute Maximum Ratings (Ta = 25 C) Item Symbol Rating Unit Measurement conditions LED forward current IF 50 mA LED forward current reduction rate IF/C 0.5 mA/C Ta 25C LED reverse voltage VR 5 V Connection temperature TJ 125 C Load voltage (AC peak/DC) VOFF 350 V Continuous load current (AC peak/DC) IO 110 mA ON current reduction rate IO/C 1.1 mA/C Ta 25C Dielectric strength between VI-O 1500 Vrms AC for 1 min I/O (See note 1.) Note: 1. The dielectric strength between the input and Ambient operating temperature Ta 40 to +85 C With no icing or condensation output was checked by applying voltage Ambient storage temperature Tstg 55 to +125 C With no icing or condensation between all pins as a group on the LED side and Soldering temperature - 260 C10 s all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25 C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR - - 10 A VR = 5 V Note: 2. Turn-ON and Turn-OFF Times Capacity between terminals CT - 30 - pF V = 0, f = 1 MHz IF 1 (3) 8 (6) RL VDD Trigger LED forward current IFT - 1 3 mA IO = 110 mA VOUT 2 (4) 7 (5) -25 35 IF = 5 mA, IO = 110 mA, t < 1 s Maximum resistance RON with output ON -35 50 IF = 5 mA, IO = 110 mA Current leakage when the relay is open ILEAK - - 1.0 A VOFF = 350 V Capacity between terminals COFF - 30 - pF V = 0, f = 1 MHz IF Capacity between I/O terminals CI-O - 0.8 - pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 - - M VI-O = 500 VDC, ROH 60 % 90% VOUT 10% Turn-ON time tON -0.3 1 ms IF = 5 mA, RL = 200 , t ON t OFF VDD = 20 V (See note 2.) Turn-OFF time tOFF -0.1 1 ms 1 Output Input Output InputG3VM-352J MOS FET Relays Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD -- 280 V Operating LED forward current IF 5 10 25 mA Continuous load current (AC peak/DC) IO -- 100 mA Ambient operating temperature Ta 20 - 65 C Engineering Data LED forward current vs. Ambient Continuous load current vs. Ambient LED forward current vs. LED forward temperature temperature voltage IF - Ta IO - Ta IF - VF 100 240 100 Ta = 25C 200 30 80 160 10 60 120 3 40 80 1 20 40 0.3 0 0 0.1 -20 120 0 20 40 60 80 100 -20 0 20 40 60 80 100 120 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta (C) Ambient temperature Ta (C) LED forward voltage VF (V) Continuous load current vs. On-state On-state resistance vs. Ambient Trigger LED forward current vs. voltage temperature Ambient temperature IO - VON RON - Ta IFT - Ta 200 50 5 Ta = 25C IO = 110 mA IO = 110 mA IF = 5 mA IF = 5 mA t < 1s t < 1s 40 4 100 30 3 0 20 2 -100 10 1 0 0 -200 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 -4-3 2-2 1 013 4 Ambient temperature Ta (C) Ambient temperature Ta (C) On-state voltage VON (V) Turn ON, Turn OFF time vs. LED Turn ON, Turn OFF time vs. Ambient Current leakage vs. Ambient forward current temperature temperature tON, tOFF - IF tON, tOFF - Ta ILEAK - Ta 3000 3000 100 Ta = 25C VOFF = 350 V VDD = 20 V RL = 200 30 1000 1000 tON 10 300 300 tOFF 3 100 100 tOFF 1 30 VDD = 20 V 30 0.3 RL = 200 tON IF = 5 mA 10 0.1 10 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 1 3 5 10 30 100 300 LED forward current IF (mA) Ambient temperature Ta (C) Ambient temperature Ta (C) Safety Precautions Refer toCommon Precaution for all G3VM models. 2 Continuous load current IO (mA) LED forward current IF (mA) Turn ON, Turn OFF time tON, tOFF (s) Turn ON, Turn OFF time tON, tOFF (s) Continuous load current IO (mA) On-state resistance RON ( ) Current leakage ILEAK (nA) LED forward current IF (mA) Trigger LED forward current IFT (mA)