2PA 103 MOS FET Relays G3VM-71PR Smallest 75V MOS FET Relay InThe Market (USOP Package Size) Specifically Designed for low ON resistance of 1 (typical). Continuous load current of 400 mA. Dielectric strength of 500Vrms between I/O. RoHS compliant. Application Examples Semiconductor test equipment Test & Measurement devices and Data loggers Communication equipment Note: The actual product is marked differently from the image shown here. List of Models Package type Contact form Terminals Load voltage (peak value) Model Number per tape USOP4 SPST-NO Surface-mounting 75VAC orVDC G3VM-71PR --- (1FormA) terminals G3VM-71PR(TR05) 500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-71PR 3.25 2.05 0.15 1.65 (0.4) 0.2 Note: The actual product is marked differently 1.27 2.85 Weight: 0.03 g from the image shown here. 2.2 (0.35) Terminal Arrangement/Internal Connections (Top View) G3VM-71PR Model name 7P0 OMRON mark LOT No. 103 Note: The actual product is marked differently from the image shown here. Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-71PR 2.9 0.85 0.8 1.27 MOS FET Relays G3VM-71PR 1 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement Conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between F the input and output was LED forward current I /C 0.5 mA/CT 25C checked by applying voltage F a reduction rate between all pins as a group on the LED side and all pins as a LED reverse voltage V 5V R group on the light-receiving side. Connection temperature T 125 C j Output Load voltage (AC peak/DC) V 75 V OFF Continuous load current I 400 mA O ON current reduction rate I /C 4.0 mA/CT 25C ON a Pulse ON currrent I 1.2 A t=100ms, Duty=1/10 OP Connection temperature T 125 C j Dielectric strength between input and V 500 V AC for 1 min I-O rms output (See note 1.) Ambient operating temperature T 40 to +85 C With no icing or condensation a Ambient storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature --- 260 C10s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I =10mA F F Note: 2. Turn-ONandTurn-OFFTimes Reverse current I --- --- 10 AV =5V R R IF 1 4 RL VDD Capacity between terminals C --- 15 --- pF V=0,f=1MHz T VOUT 2 3 Trigger LED forward current I --- 0.5 3 mA I = 100 mA FT O Output Maximum resistance with output ON R --- 1.0 1.5 I = 5 mA, I = 400 mA ON F O t<1s IF Current leakage when the relay is open I --- --- 1 nA V =75V LEAK OFF Capacity between terminals C --- 30 --- pF V = 0, f = 100 MHz, OFF 90% VOUT t<1s 10% tON tOFF Capacity between I/O terminals C --- 0.4 --- pF f = 1 MHz,V =0V I-O s Insulation resistance between I/O terminals R 1,000 --- --- M V = 500VDC, I-O I-O R 60% oH Turn-ON time t --- 0.4 2 ms I = 5 mA, R = 200 , ON F L V =20V(Seenote2.) DD Turn-OFF time t --- 0.2 1 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 60 V DD Operating LED forward current I 5 7.5 20 mA F Continuous load current (AC peak/DC) I --- --- 400 mA O Operating temperature T 20 --- 65 C a 2 MOS FET Relays G3VM-71PR