ESD8006 ESD Protection Diode Low Capacitance Array for High Speed Data Lines The ESD8006 is specifically designed to protect USB 3.0 and Thunderbolt interfaces from ESD. Ultralow capacitance and low www.onsemi.com ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flowthrough MARKING style package allows for easy PCB layout and matched trace lengths DIAGRAM necessary to maintain consistent impedance between high speed differential lines. UDFN8 6TM CASE 517CB Features 1 Low Capacitance (0.25 pF Max, I/O to GND) 6T = Specific Device Code M = Date Code Protection for the Following IEC Standards: = PbFree Package IEC 6100042 (Level 4) (Note: Microdot may be in either location) Low ESD Clamping Voltage SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AECQ101 Qualified and PIN CONFIGURATION PPAP Capable GND GND These Devices are PbFree, Halogen Free/BFR Free and are RoHS 10 9 Compliant Typical Applications USB 3.0/3.1 1 2 3 456 7 8 Thunderbolt I/O I/O GND I/O I/O GND I/O I/O Display Port MAXIMUM RATINGS (T = 25C unless otherwise noted) ORDERING INFORMATION J Rating Symbol Value Unit Device Package Shipping Operating Junction Temperature Range T 55 to +125 C J ESD8006MUTAG UDFN8 3000 / Tape & (PbFree) Reel Storage Temperature Range T 55 to +150 C stg Lead Solder Temperature T 260 C SZESD8006MUTAG UDFN8 3000 / Tape & L Maximum (10 Seconds) (PbFree) Reel For information on tape and reel specifications, IEC 6100042 Contact (ESD) ESD 15 kV including part orientation and tape sizes, please IEC 6100042 Air (ESD) ESD 15 kV refer to our Tape and Reel Packaging Specification Stresses exceeding those listed in the Maximum Ratings table may damage the Brochure, BRD8011/D. device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2017 Rev. 5 ESD8006/DESD8006 I/O I/O I/O I/O I/O I/O Pin 1 Pin 2 Pin 4 Pin 5 Pin 7 Pin 8 Pins 3, 6, 9, 10 Note: Common GND Only Minimum of 1 GND connection required Figure 1. Pin Schematic www.onsemi.com 2 =