LV56841PVD-XH ON Semiconductor

Ordering number : ENA2181A LV56841PVD Bi-CDMOS LSI LV56841PVD Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Supply voltage Vmax V 1, V2 36 V CC CC CC V6IN max V6IN (*) 7 V Input voltage V max CTRL1, CTRL2 7 V IN Allowable power dissipation Pd max -Independent IC Ta 25C 1.3 W Al heat sink * 5.3 W -Size of heatsink: infinite 26 W Peak supply voltage V peak See the appendix for waveform. 50 V CC Operating ambient temperature Topr -40 to +85 C Storage temperature Tstg -55 to +150 C Junction temperature Tj max 150 C * : When the Aluminum heat sink (50mm 50mm 1.5mm) is used Waveform of surge test (V 1, V 2) *V6IN is designed to tolerant toward short period of CC CC over-voltage (max 20V) which is assumed in condition of short circuit between V 1/V 2 and V6IN. 50V CC CC 90% However, applying over-voltage higher than maximum rating (7V) to V6IN may degrade the device reliability 10% 16V 5msec 100msec Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Recommended Operating range at Ta = 25C V 1 CC Parameter Conditions Ratings Unit Operating supply voltage 1 V output 7 to 16 V DD V 2 CC Parameter Conditions Ratings Unit Operating supply voltage 2 ILM output (10V) 12 to 16 V ILM output (8V) 10 to 16 V Operating supply voltage 3 AUDIO output (9V) 10 to 16 V AUDIO output (5V) 8 to 16 V Operating supply voltage 4 CD output (I = 1.3A) 10.5 to 16 V O CD output (I 1A) 10 to 16 V O Operating supply voltage 5 EXT output, ANT output 10 to 16 V V6IN Parameter Conditions Ratings Unit Operating supply voltage 6 SW33V output 5.5 to 6.5 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. No.A2181-2/15