MC74LVXU04 Hex Inverter (Unbuffered) The MC74LVX04 is an advanced high speed CMOS unbuffered hex inverter. The inputs tolerate voltages up to 7.0 V, allowing the interface of 5.0 V systems to 3.0 V systems. MC74LVXU04 MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V DC Input Voltage 0.5 to +7.0 V IN V DC Output Voltage 0.5 to V + 0.5 V OUT CC I DC Input Diode Current V < GND 20 mA IK I I DC Output Diode Current V < GND 20 mA OK O I DC Output Sink Current 25 mA OUT I DC Supply Current per Supply Pin 50 mA CC T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature under Bias +150 C J Thermal Resistance SOIC 250 C/W JA TSSOP P Power Dissipation in Still Air at 85 CSOIC 250 mW D TSSOP MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 30% 35% UL 94V0 0.125 in R V ESD Withstand Voltage Human Body Model (Note 1) > 2000 V ESD Machine Model (Note 2) > 200 Charged Device Model (Note 3) 2000 I Latchup Performance Above V and Below GND at 85 C (Note 4) 300 mA Latchup CC Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Tested to EIA/JESD22A114A. 2. Tested to EIA/JESD22A115A. 3. Tested to JESD22C101A. 4. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V Supply Voltage 2.0 3.6 V CC V Input Voltage (Note 5) 0 5.5 V I V Output Voltage (HIGH or LOW State) 0 V V O CC T Operating FreeAir Temperature 40 +85 C A t/ V Input Transition Rise or Fall Rate V = 3.0 V 0.3 V 0 100 ns/V CC Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 5. Unused inputs may not be left open. All inputs must be tied to a high or lowlogic input voltage level.