Conductive Polymer Tantalum Solid Capacitors UPGRADE Surface Mount Type TPS series Features 105 2000 h Small size, Low profileL 3.5 W 2.8 H 1.2 mm max. RoHS compliance, Halogen free Specifications Size code B1S Category temp. range 55 to +105 Rated volt. range 2.5 V to 6.3 V Category volt. range 2.5 V to 6.3 V Rated cap. range 150 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +105 2000 h rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor(tan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value Dissipation factor(tan ) 1.5 times of the initial limit (Steady State) Leakage current 3 times of the initial limit Marking Dimensions (not to scale) L Rated voltage code Polarity marking (+) Lot. No. Rated capacitance code R.voltage code UnitV R.capacitance code UnitF W1 S S e 2.5 E8 150 Unit W10.1 g 4.0 J8 220 Size code L0.2 W0.2 H0.1 S0.3 j 6.3 N8 330 B1S 3.5 2.8 1.1 0.8 2.2 * Externals of figure are the reference. Characteristics list Case size Floor life Specifications Standard Cate- level Rated Cate- Rated Rated gory Size Min. temper- gory capaci- *1 voltage temper- Ripple *4 Reflow Reflow *2 packaging LC ature voltage tance code *3 ESR L W H Part number temp temp tan (V) ature current q ty (m max.) (A) () (V) (F) 260 250 (mA rms) () (pcs) 105 2.5 105 220 3.5 2.8 1.1 1400 30 0.10 55.0 ETPS220MUD 2500 2.5 105 2.5 105 330 3.5 2.8 1.1 1400 30 0.10 82.5 ETPS330MUD 2500 4.0 105 4.0 105 220 3.5 2.8 1.1 B1S 1400 30 0.10 88.0 4TPS220MUD 2500 3 3 105 6.3 105 3.5 2.8 1.1 1400 30 0.10 94.5 6TPS150MUD 2500 6.3 150 NEW 105 6.3 105 3.5 2.8 1.1 1250 35 0.10 94.5 6TPS150MZD 2500 *1: Ripple current100 kHz / +45 *2: ESR100 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for Reflow conditions ,Taping specifications andFloor life leve . Compatible products list Series Size code Conventional model Series Size code Compatible model B1G 2R5TPG220M ETPS220MUD 2R5TPG220MUG ETPS220MUD B15G 4TPG220M 4TPS220MUD 6TPG100M 6TPS150MUD TPS B1S B1G 6TPG100MG 6TPS150MUD TPG 6TPG100MZGD 6TPS150MUD 6TPG150M 6TPS150MUD B15G 6TPG150MZG 6TPS150MUD 8TPG47M 10TPG47M B1G 10TPG47M TPG B1G - 12TPG33M - Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09-Jul-21 H WGuidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products typical operations and application circuits. We do not guarantee the non-infringement of third party s intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please selectSales Inquir in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Oct-19