For FPC FPC/FFC connectors (0.2mm pitch) Y2B Back lock Slim, 0.2 mm pitch and double top and bottom contacts construction FEATURES 1. Slim (width: 3.15 mm) and low prole design 2. Double top and bottom contacts construction 3. Time and effort can be reduced by delivering with lever open. 4. Wiring patterns can be placed under the connector. 5. Ni barrier with high resistance to solder creepage. APPLICATIONS Smartphones, DSC and other mobile devices DETAILED FEATURES Slim and low prole design (Contact Improvement of mechanical design Prevent displacement of FPC insertion pitch: 0.2 mm) exibility Constructed to make positional Back lock type with a slim depth of 3.15 Top and bottom double contacts displacement difcult by surrounding the mm (including lever). Low prole eliminate the need of using different four sides on the FPC inlet side with wall construction of 0.9 mm height facilitates connectors (with either top or bottom molding device slimness and miniaturization. contacts) depending on the FPC wiring conditions. ORDERING INFORMATION ACCTB15E 201803-T 1FPC/FFC connectors Y2B (0.2mm pitch) PRODUCT TYPES Packing Height Number of pins Part number Inner carton (1-reel) Outer carton 23 AYF212335 31 AYF213135 0.9 mm 41 AYF214135 5,000 pieces 10,000 pieces 51 AYF215135 61 AYF216135 Notes: 1. Order unit: For volume production: 1-inner carton (1-reel) units. For samples, please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics The followings show specications, when using an applicable FPC (thickness 0.20 mm) Item Specications Conditions Rated current 0.2A/pin contact (Max. 5A at total pin contacts) Rated voltage 50V AC/DC No short-circuiting or damage at a detection current of 1 mA Electrical Dielectric strength 150V AC for 1 min. when the specied voltage is applied for one minute. characteristics Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Based on the contact resistance measurement method Contact resistance Max. 100m specied by JIS C 5402. Measurement of the maximum force applied until the Mechanical FPC holding force Min. 0.13N/pin contact pin contacts (initial) inserted compatible FPC is pulled out in the insertion axis characteristics direction while the connector lever is closed Ambient temperature 55 to +85C No icing. No condensation. Reow soldering: Peak temperature: 260C or less The initial specication must be satised electrically Soldering heat resistance (on the surface of the PC board around the connector and mechanically. terminals) Soldering iron: 300C within 5 sec. 350C within 3 sec. 55 to +85C (product only) Storage temperature No icing. No condensation. 40 to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 1 55 30 5 cycles, 3 Environmental Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 characteristics (with FPC mated) +3 contact resistance max. 100m 3 85 30 0 4 Max. 5 0 55 3 120 hours, Humidity resistance Conformed to IEC60068-2-78 insulation resistance min. 100M, (with FPC mated) Temperature 402C, humidity 90 to 95% R.H. contact resistance max. 100m 24 hours, Saltwater spray resistance Conformed to IEC60068-2-11 insulation resistance min. 100M, (with FPC mated) Temperature 352C, saltwater concentration 51% contact resistance max. 100m H2S resistance 48 hours, Temperature 402C, gas concentration 31 ppm, (with FPC mated) contact resistance max. 100m humidity 75 to 80% R.H. Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 51 pins: 0.07 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating ACCTB15E 201803-T 2