ECA-1JM101B Panasonic

Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type M-A series Features Endurance : 85 2000 h Smaller than series SU RoHS compliant Specifications Category temp. range 40 to +85 25 to +85 Rated voltage range 6.3 V to 100 V 160 V to 450 V Capacitance range 2.2 F to 22000 F 2.2 F to 470 F Capacitance tolerance 20 % (120 Hz / +20) I 0.01 CV or 3 (A) After 2 minutes Leakage current I 0.06 CV + 10 (A) After 2 minutes (Which is greater) Dissipation factortan ) Please see the attached characteristics list After applying rated working voltage for 2000 hours at +85 C2 , when the capacitors are restored to 20, capacitors shall meet the following limits. Endurance Capacitance change Within 20 % of the initial value Dissipation factortan ) 150 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +85 2 with no voltage applied and then being Shelf life stabilized at +20 C, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 50, 60 120 1 k 10 k to Cap.F 2.2 to 22000 0.70 1.00 1.30 1.70 Dimensions Sleeve 8 10 Pressure relief 6.3 14min. 3min. L* D0.5 D0.5 * L 16L1.0 L 20L2.0 Unitmm D 5.0 6.3 8.0 10.0 12.5 16.0 18.0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) M-A series Characteristics list Endurance : 85 2000 h Case size Min. Packaging Specification Lead length (mm) Q ty (PCS) () Rated Capacitance voltage Lead space Part No. (20 %) Strai- Ripple Lead (V) (F) *2 *1 D L dia. Taping Taping ght Taping tan current Straight (d) B i (mA rms) leads 220 5.0 11.0 240 0.28 0.5 2.0 5.0 2.5 200 2000 ECA0JM221( ) 470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000 1000 8.0 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000 2200 10.0 16.0 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500 3300 10.0 20.0 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500 6.3 4700 12.5 20.0 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500 6800 12.5 25.0 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500 10000 16.0 25.0 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250 15000 16.0 31.5 1700 0.56 0.8 7.5 ECA0JM153 100 22000 18.0 35.5 1900 0.70 0.8 7.5 ECA0JM223 50 330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000 1000 10.0 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500 2200 10.0 20.0 920 0.26 0.6 5.0 5.0 200 500 ECA1AM222( ) 3300 12.5 20.0 1090 0.28 0.6 5.0 5.0 200 500 ECA1AM332( ) 10 4700 12.5 25.0 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500 6800 16.0 25.0 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250 10000 16.0 31.5 1600 0.42 0.8 7.5 ECA1AM103 100 15000 18.0 35.5 1850 0.52 0.8 7.5 ECA1AM153 50 10 5.0 11.0 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000 22 5.0 11.0 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000 33 5.0 11.0 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000 47 5.0 11.0 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000 100 5.0 11.0 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000 220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000 16 470 8.0 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000 1000 10.0 16.0 680 0.20 0.6 5.0 5.0 200 500 ECA1CM102( ) 2200 12.5 20.0 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500 3300 12.5 25.0 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500 4700 16.0 25.0 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250 6800 16.0 31.5 1600 0.30 0.8 7.5 ECA1CM682 100 10000 18.0 35.5 1800 0.38 0.8 7.5 ECA1CM103 50 100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000 330 8.0 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000 470 10.0 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500 1000 10.0 20.0 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500 25 2200 12.5 25.0 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500 3300 16.0 25.0 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250 4700 16.0 31.5 1500 0.22 0.8 7.5 100 ECA1EM472 6800 18.0 35.5 1750 0.26 0.8 7.5 50 ECA1EM682 *1: Ripple current (120 Hz / +85 ) *2: tan (120 Hz/ +20 ) When requesting taped product, please put the letter B or i between the ( ). Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19