EEU-HD1C103 Panasonic

Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type HD-A series Features Endurance : 105 1000 h to 2000 h Minaturize, Higher Capacitance : 1 Size miniturized product of current A-NHG AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 10 V to 50 V Capacitance range 2.2 F to 22000 F Capacitance tolerance 20 % (120 Hz / +20) Leakage current I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Dissipation factortan ) Please see the attached characteristics list After following life test with DC voltage and +105 2 ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 , the capacitors shall meet the limits specified bellow. Duration Endurance 5 to 8 : 1000 h, 10 to 18 : 2000 h Capacitance change Within 20 % of the initial value Dissipation factortan ) 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 2 with no voltage applied and then being Shelf life stabilized at +20 C, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 60 120 1 k 10 k 100 k Cap.F 2.2 to 33 0.75 1.00 1.55 1.80 2.00 47 to 470 0.80 1.00 1.35 1.50 1.50 1000 to 22000 0.85 1.00 1.10 1.15 1.15 Dimensions 8 10 Sleeve Pressure relief 6.3 14min. 3min. L* D0.5 D0.5 * L 16L1.5 L 20L2.0 Unitmm D 5.0 6.3 8.0 10.0 12.5 16.0 18.0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) HD-A series Characteristics list Endurance : 105 1000 h / 5 to 8, 105 2000 h / 10 to 18 Case size Min. Packaging Specification Lead length (mm) Q tyPCS) () Rated Capacitance (20 %) Part No. voltage Lead space Ripple Endu- Lead (F) (V) Straight *1 *2 D L current tan rance dia. Taping Taping Taping Straight leads (mA rms) (h) (d) B H 330 6.3 11.2 200 0.24 1000 0.5 5.0 2.5 EEUHD1A331( ) 200 2000 2.5 470 8.0 11.5 250 0.24 1000 0.6 5.0 EEUHD1A471( ) 200 1000 3.5 1000 10.0 12.5 460 0.24 2000 0.6 5.0 EEUHD1A102( ) 200 500 5.0 2200 10.0 16.0 760 0.26 2000 0.6 5.0 EEUHD1A222( ) 200 500 5.0 10 4700 12.5 20.0 1260 0.30 2000 0.6 5.0 5.0 EEUHD1A472( ) 200 500 6800 12.5 25.0 1570 0.34 2000 0.6 5.0 EEUHD1A682( ) 200 500 5.0 10000 16.0 25.0 1890 0.42 2000 0.8 7.5 7.5 EEUHD1A103( ) 100 250 15000 16.0 31.5 2180 0.52 2000 0.8 EEUHD1A153 100 7.5 22000 18.0 35.5 2400 0.66 2000 0.8 7.5 EEUHD1A223 50 100 5.0 11.0 110 0.20 1000 0.5 5.0 2.5 EEUHD1C101( ) 200 2000 2.0 220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 EEUHD1C221( ) 200 2000 330 8.0 11.5 260 0.20 1000 0.6 5.0 EEUHD1C331( ) 200 1000 3.5 470 8.0 11.5 310 0.20 1000 0.6 5.0 EEUHD1C471( ) 200 1000 3.5 3300 12.5 20.0 1170 0.24 2000 0.6 5.0 EEUHD1C332( ) 200 500 5.0 16 4700 12.5 25.0 1480 0.26 2000 0.6 5.0 EEUHD1C472( ) 200 500 5.0 6800 16.0 25.0 1780 0.30 2000 0.8 7.5 EEUHD1C682( ) 100 250 7.5 8200 16.0 25.0 1780 0.34 2000 0.8 7.5 EEUHD1C822( ) 100 250 7.5 10000 16.0 31.5 2060 0.38 2000 0.8 EEUHD1C103 100 7.5 15000 18.0 35.5 2210 0.48 2000 0.8 EEUHD1C153 50 7.5 47 5.0 11.0 91 0.16 1000 0.5 5.0 2.5 EEUHD1E470( ) 200 2000 2.0 68 5.0 11.0 91 0.16 1000 0.5 5.0 2.5 EEUHD1E680( ) 200 2000 2.0 100 6.3 11.2 130 0.16 1000 0.5 5.0 2.5 EEUHD1E101( ) 200 2000 2.5 220 8.0 11.5 230 0.16 1000 0.6 5.0 EEUHD1E221( ) 200 1000 3.5 330 8.0 11.5 310 0.16 1000 0.6 5.0 EEUHD1E331( ) 200 1000 3.5 470 10.0 12.5 380 0.16 2000 0.6 5.0 EEUHD1E471( ) 200 500 5.0 25 1000 10.0 16.0 680 0.16 2000 0.6 5.0 EEUHD1E102( ) 200 500 5.0 2200 12.5 20.0 1090 0.18 2000 0.6 5.0 EEUHD1E222( ) 200 500 5.0 3300 12.5 25.0 1400 0.20 2000 0.6 5.0 EEUHD1E332( ) 200 500 5.0 4700 16.0 25.0 1750 0.22 2000 0.8 7.5 EEUHD1E472( ) 100 250 7.5 5600 16.0 25.0 1750 0.24 2000 0.8 7.5 7.5 EEUHD1E562( ) 100 250 6800 16.0 31.5 2040 0.26 2000 0.8 EEUHD1E682 100 7.5 10000 18.0 35.5 2200 0.34 2000 0.8 7.5 EEUHD1E103 50 47 5.0 11.0 90 0.14 1000 0.5 5.0 2.5 EEUHD1V470( ) 200 2000 2.0 100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 EEUHD1V101( ) 200 2000 220 8.0 11.5 270 0.14 1000 0.6 5.0 EEUHD1V221( ) 200 1000 3.5 330 10.0 12.5 350 0.14 2000 0.6 5.0 5.0 EEUHD1V331( ) 200 500 470 10.0 16.0 460 0.14 2000 0.6 5.0 EEUHD1V471( ) 200 500 5.0 35 680 10.0 16.0 460 0.14 2000 0.6 5.0 EEUHD1V681( ) 200 500 5.0 2200 12.5 25.0 1260 0.16 2000 0.6 5.0 EEUHD1V222( ) 200 500 5.0 3300 16.0 25.0 1610 0.18 2000 0.8 7.5 EEUHD1V332( ) 100 250 7.5 4700 16.0 31.5 1910 0.20 2000 0.8 EEUHD1V472 100 7.5 6800 18.0 35.5 2050 0.24 2000 0.8 EEUHD1V682 50 7.5 *1: Ripple current (120 Hz / +105 ) *2: tan (120 Hz/ +20 ) When requesting taped product, please put the letter or be tween the( . Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19