PAN1780 Bluetooth Low Energy Module Product Specification Rev. 0.4 Wireless Connectivity PAN1780 Bluetooth Module Overview Bluetooth The PAN1780 is a Bluetooth 5 Low Energy (LE) LE 2Mbps high speed PHY, LE long range module based on the Nordic nRF52840 single chip coded PHY controller. LE advertising extensions (advertising on 40 channels total) Channel selection algorithm 2 Features LE secure connections Surface mount type dimensions: Over-the-air update of application software 15.6mm x 8.7mm x 2 mm Qualified Bluetooth mesh profile stack Same form factor as PAN1026A and PAN1762 but smaller pitch and more pins Nordic nRF52840 featuring ARM Cortex -M4F Characteristics with 64MHz Typical sensitivity: -95dBm 1Mb/s Bluetooth 5 LE including LE 2M and LE Coded and -103dBm 125kb/s PHY Typical max. output power: 8dBm, configurable Embedded 1MB flash memory and 256kB from -20dBm in 4dB steps and -40dBm in internal RAM whisper mode Includes ARM TrustZone CryptoCell 310 and Typical current consumption: 4.8mA in Tx supports secure boot including Root of ( 0dBm) and 4.8mA in Rx mode Trust (RoT) Typical current consumption: 0.4A in System Up to 48 general purpose I/Os (GPIO), which OFF mode, 1.5A with RTC wake up are shared by up to 4SPI, 2IC, 2UART, On-module DC/DC and LDO regulators with 4PWM, 8ADC, 1 NFC-A, 32kHz IN/OUT, automated low current modes nRESET Voltage range: 1.7V to 5.5V USB 2.0 full-speed device interface Built in temperature sensor Temperature range: -40C to 85C Block Diagram Product Specification Rev. 0.4 Page 2 of 27