EVQ-21305R Panasonic

Light Touch Switches/EVQ2 5N Type 2R Light Touch Switches Type: EVQ2 Features Wealth of product types: With or without a ground terminal, vertical type, snap-in terminals, etc. Can be automatically dip-soldered: Integral molding of the terminals and main body prevents the escape of ux. Recommended Applications Operating switches for electronic equipment Explanation of Part Numbers 1 2 3 4 567 8 9 E V Q2 Product Code Type Height Push Plate Color =Standard Product Chart Height Operating Positioning Pin Ground Terminal Force 4.3 mm 5.0 mm 7.0 mm 9.5 mm With ground terminal 1.0 N Without positioning pin Without ground terminal With ground terminal 1.3 N Without positioning pin Without ground terminal With ground terminal 1.6 N Without positioning pin Without ground terminal With ground terminal 2.6 N Without positioning pin Without ground terminal Speci cations Type Snap action/Push-on type SPST A B Circuit Diagram B A Rating 10 A 2 Vdc to 20 mA 15 Vdc (Resistiv load) Electrical Contact Re sis tance 50 m max. Insulation Re sis tance 50 M min. (at 100 Vdc) Dielectric Withst and ing Voltage 250 Vac for 1 minute 3 ms max. (ON) Bouncing 8 ms max. (OFF) 1.0 N0.4 N Operating Force 1.3 N0.4 N 2.6 N0.6 N Mechanical 1.6 N0.5 N Travel 0.25 mm0.10 mm EnduranceOperating Life 100000 cycles min. 50000 cycles min. Operating Temper a ture 20 C to +70 C 40 C to +85 C (Bulk) Storage Temper a ture 20 C to +40 C (Taping) Minimum Quantity/ Top-push 1000 pcs. Radial Taping (Reel Pack) Packing Unit Quantity/CartonTop-push 10000 pcs. 1 million cycles also available, consult our salesmen. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 ES122 Light Touch Switches/EVQ2 Dimensions in mm (not to scale) EVQ2 With ground terminal 2-terminals type Without ground terminal P Q The direction of or side is randomly settled. 1.3 max. 1.0 max. 6.00.3 1.0 max. 12.71.0 1.3 max. Q P E-E Section 0.8 0.6 Adhesive tape shall not extend beyond 0.3 A base paper. B 0.5 Adhesive tape +0.8 3.850.70 5.00.2 3.6 EE A B 0.3 max. Circuit diagram 4.00.3 6.350.70 12.70.3 JIS C0806-2 shall be applied to the items not specified here. 2-1.000.05 PWB mounting hole for reference (Pitch tolerance: 0.1) View from mounting side Part Numbers Operating Force H=Height Push Plate Color Operating Life EVQ21304M 1.0 N 4.3 mm White 100000 cycles EVQ21305R 1.0 N 5.0 mm Red 100000 cycles EVQ21307K 1.0 N 7.0 mm Black 100000 cycles EVQ21309K 1.0 N 9.5 mm Black 100000 cycles EVQ21404M 1.3 N 4.3 mm White 100000 cycles EVQ21405R 1.3 N 5.0 mm Red 100000 cycles EVQ21407K 1.3 N 7.0 mm Black 100000 cycles EVQ21409K 1.3 N 9.5 mm Black 100000 cycles EVQ21504M 1.6 N 4.3 mm White 100000 cycles EVQ21505R 1.6 N 5.0 mm Red 100000 cycles EVQ21507K 1.6 N 7.0 mm Black 100000 cycles EVQ21509K 1.6 N 9.5 mm Black 100000 cycles EVQ22704M 2.6 N 4.3 mm White 50000 cycles EVQ22705R 2.6 N 5.0 mm Red 50000 cycles EVQ22707K 2.6 N 7.0 mm Black 50000 cycles EVQ22709K 2.6 N 9.5 mm Black 50000 cycles Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 ES123 3.4 6.00.3 0.9 0.5 max. H 5.0 +1.0 18.0 0 2.0 max. 6.00.5 9.00.5 0.60.3 +1.0 1.5 max. 18.00.5