QuickNet OM4 and OM5 Signature Core Trunk Cable SPECIFICATION SHEET general information QuickNet OM4 and OM5 Signature Core Trunk Cable Assemblies allow for rapid deployment of high- density permanent links in a single assembly for data center applications requiring quick infrastructure deployment, such as main, horizontal, and zone distribution areas. These trunk cable assemblies optimize cable routing requirements to ensure efficient use of pathway space and significantly reduce installation time and cost. Signature Core Trunk Cable Assemblies are built with modular MPO connectivity and provide compatibility, flexibility, and system performance in all permanent link applications. technical information OM4 and OM5 Signature Core Fibers are modal and chromatic dispersion compensating multi-mode fibers designed for optimum performance with high-speed Vertical Cavity Surfacing Emitting Lasers (VCSEL) transceivers. The refractive index profile is engineered to correct for the interaction between modal and chromatic dispersion increasing the total channel bandwidth. Like OM3 and OM4 fiber types, the actual supported reach for Signature Core Fiber family depends on the electrical and optical characteristics of the VCSEL transceiver1. OM4 Signature Core provides you on average 20% longer reach than OM4 defined standard for all applications using Ethernet, Fibre Channel and Cisco BiDi technologies. For example, the OM4 Signature Core Fiber will support a 600m reach with 10GBASE-SR transceivers compared to a 400m maximum reach over OM4 as specified in IEEE 802.32. OM5 Signature Core provides you on average 15% longer reach than OM5 defined standard for all applications that use Short Wavelength Division Multiplexing (SWDM). SWDM is a technology that boosts transmission capacity by sending multiple signals in four wavelengths across the 850nm to 940nm on a single fiber. OM4 and OM5 Signature Core Fibers are 100% standards compliant meeting all OM3 and OM4 specifications, with an additional requirement for Differential Mode Delay (DMD) that compensates for modal and chromatic dispersion effects. OM5 Signature Core includes additional bandwidth characterization at 953 nm to support extended distances when using SWDM. application Data centers requiring quick infrastructure deployment with extended reach. Small diameter trunk cable assemblies use 30 to 40% less space which is ideal for high density cable applications. construction physical properties Cable type: Indoor unarmored Cable outside 12-fiber: 4.5mm diameter (OD): 24-fiber: 5.4mm Cable Optical Fiber Non-conductive jacket ratings: Plenum (OFNP) Cable weight: 12F Plenum: 23.6kg/km (15.9lbs/kft) Low Smoke Zero Halogen (LSZH) 12F LSZH: 22.2kg/km (14.9lbs/kft) 24F Plenum: 31.7kg/km (21.3lbs/kft) Fiber type: Signature Core OM4+ and OM5+ 24F LSZH: 29.7kg/km (19.9lbs/kft) Fiber count: 12, 24 Cable tensile rating: 440N (100lb.) Connector end A: Type: MPO female, PanMPO female Color: Black, Aqua, Lime green Cable Breakout outside diameter: 10N/m Polarity: Method A compressive load: Connector end B: Type: MPO female, PanMPO female Connector durability: 500 mating cycles* Color: Black, Aqua, Lime green Bend radius: Under load: 20 x cable OD Polarity: Method A Static: 10 x cable OD Number of breakouts: 12-fiber: 1 Transition 12-fiber: 10mm 24-fiber: 2 outside diameter: 24-fiber: 10mm Jacket color: Aqua, Lime green Pulling 12-fiber: 19mm eye diameter: 24-fiber: 23mm optical properties Breakout length: 1m Cable attenuation: 1.8dB/km 953 nm for OM5 Signature Core environmental properties Maximum connector 0.25dB Storage and -40C to +70C insertion loss: shipping temperature: (-40F to 158F) Minimum connector 30dB Installation temperatures: -10C to +60C return loss: (14F to 140F) 1 The actual channel reach of a laser optimized, multimode fiber (OM3, OM4, or Signature Core ) depends on the optical and electrical parameters of the VCSEL transceiver. Operating temperature: -20C to 70C For worst-case optical and electrical parameters, Signature Core Fiber will provide at least (-4F to 158F) 20% greater reach over standard un-compensated OM4 fiber. 2 OM4 fiber was ratified in the IEEE802.3/D3.0 proceedings from Dec. 15, 2011, Table 52-6 with an Operating Range of 2m to 400m. standards 3 Reach values are a minimum. 4 Differential Mode Delay (DMD) is a metric defined in telecommunications industry association Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, standard EIA/TIA 455-220-A, January 2003, which describes a method for measuring the TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1, RoHS compliant, modal dispersion of laser optimized multimode fiber. 5 TIA-492-AAAD, IED 60793-2-10 type A1a.3 OM5 fiber has been approved as the new wideband multimode standard on June 2016, by ANSI/TIA-492AAAE. www.panduit.com QuickNet OM4 and OM5 Signature Core Trunk Cable part number Description: FSUYP7E7EKAM010 = Fiber OM4+ Signature Core 24 fiber, small diameter, plenum, PanMPO female to PanMPO female, method A ultra IL, with pulling eye end A, 10 meters Character 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Example F S U Y P 7 E 7 E K A M 0 1 0 6 Connector Type 10 Performance/Polarity 1 Fiber F = Fiber 7 = PanMPO Female K = Polarity A/Ultra IL 8 = PanMPO Male 2 Fiber Type 11 Pulling Eye 7 Connector Variant A = Pulling Eye end A S = OM4+ Signature Core W = OM5+ Signature Core 5 = Molded Transition 1m breakout N = No Pulling Eye E = 1m equal breakout 12 Unit of Measure 3 Fiber Count 8 Connector Type F = Feet T = 12-fiber M = Meters U = 24-fiber 7 = PanMPO Female 8 = PanMPO Male 13, 14, and 15 Length 4 Cable Type 9 Connector Variant 005 100 m Y = Small Diameter 015 300 Feet E = 1m equal breakout 5 Flame Rating 5 = Molded Transition 1m breakout L = Low Smoke Zero Halogen (LSZH) P = Optical Fiber Non-conductive Plenum (OFNP) QuickNe t OM4 and OM5 Signature Cor e trunk cable assembly detail Cable Assembly Length Pulling Eye Pulling Sock Notes: 1. Standard lengths for MPO to MPO OM4 Signature Core trunk cables are available from 10 100 feet in increments of 1 foot and 10m 50m in increments of 1m. For additional lengths and availability, please contact Panduit customer service. 2. Cable assembly lengths are measured as the distance between the furthest connector tips. Length tolerance is +4 feet (1.2m)/-0 for lengths up to 100 feet (30m) and +6 feet (1.8m)/-0 for lengths greater than 100 feet (30m). 3. For hybrid solutions and special cable constructions/ratings/colors/availability, consult Panduit. 4. Standard lengths for MPO to MPO OM5 Signature Core trunk cables are available from 15 300 feet in increments of 5 feet and 5m 100m in increments of 1m. For additional lengths and availability, please contact Panduit customer service. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com FBSP137--WW-ENG or by phone: 800.777.3300 11/2017