UCSQ1-VC

Panduits Cable Cleat Products for Short Circuit Protection Panduit Pan-Steel Self-Locking Cable Ties and the MS75 Metal Strapping System represent Panduits cable cleat offering for robust cable management and short circuit protection up to 156kA. Available in a variety of sizes, these solutions ensure cables remain contained in the event of a short circuit occurrence, minimizing disruption and damage to personnel and property. Panduits Cable Cleat Products for short circuit protection are designed to perform in a wide range of harsh environments, including industries such as Oil and Gas, Power Generation, Mining, and Shipbuilding. Reduce Project Costs Reduce Installation Time Up to 2X faster installation versus competitive cable cleats Up to 50% reduction in material cost Simple and intuitive design leads to increased productivity Compatible with a variety of ladder racks and cables MS75 Technical Specifications and Testing Results Type 6.1.3 Composite SDSS Standard Duty Stainless Steel Design Specification IEC 61914:2015 Temperature for permanent application -60C to +60C IEC 61914:2015 clause 6.2 Needle Flame Test PASS IEC 61914:2015 clause 10.1 Lateral Load Test PASS IEC 61914:2015 clause 9.3 Axial Load Test PASS IEC 61914:2015 clause 9.4 Impact Resistance PASS Very Heavy IEC 61914:2015 clause 6.3, 6.3.5, 9.2 Material 316/316L Stainless Steel Cushion sleeve is Low Smoke Halogen Free (LSHF) TPE MLT Technical Specifications and Testing Results Type 6.1.3 Composite SDSS Standard Duty Stainless Steel Design Specification IEC 61914:2015 Temperature for permanent application -60C to +60C IEC 61914:2015 clause 6.2 Needle Flame Test PASS IEC 61914:2015 clause 10.1 Lateral Load Test PASS IEC 61914:2015 clause 9.3 Axial Load Test PASS IEC 61914:2015 clause 9.4 Impact Resistance PASS Very Heavy IEC 61914:2015 clause 6.3, 6.3.5, 9.2 Advisory Services Material 316/316L Stainless Steel Cushion sleeve is Low Smoke Halogen Free (LSHF) TPE Advisory Services Cable Cleat Products for Short Circuit Protection To provide optimum performance, the use of cushion sleeve is recommended, and may be required in some applications. Type 316, Self-Locking Cable Ties MLT and MS75 Strapping Series Width Max Peak Cable Tie Spacing Minimum Cable Outer Part Number (mm) Current (kA) (mm) Diameter (mm) MLT DEH15-Q316 12.7 45 300 27 15.9 70 300 39 MLT DSH-Q316 MS W75T30-Q6 19.1 85 300 40 (single loop) MS W75T30-Q6 19.1 156 300 43 (double loop) represents maximum bundle diameter in inches MLT DEH15-Q316 and MLT DSH-Q316: 4.0, 6.0 and 8.0 MS W75T30-Q6 (single loop): 4.0, 6.0, 8.0, 10.0 and 12.0 MS W75T30-Q6 (double loop): 2.0, 3.0, 4.0, 5.0 and 6.0 When double looped, same part numbers are used as for single loop, but maximum bundle diameter is reduced in half. Metal Uniclip Brackets Allows Panduit stainless steel ties and straps to be installed on any style or design of cable tray slotted or un-slotted Eliminate consideration of diagonal installations High resistance to lateral and axial movement Used with Part Number Material Pan-Steel Ties Description UCSQ1-VC Metal Rung Bracket Strut Type UCSQ1-V316 UCIB1-V316 UCRND1-VC Metal Rung Bracket Round Galvanized Steel UCIB1-VC Metal Rung Bracket I-Beam MLTS/LH/H/EH/EH15/SH, UCTH1-VC Metal Rung Bracket Top Hat MLTC/H, MLTFC/S/LH/H/EH/SH, or UCSQ1-V316 Metal Rung Bracket Strut Type MSW75 Stainless UCRND1-V316 Metal Rung Bracket Round Steel UCIB1-V316 Metal Rung Bracket I-Beam Type 316 UCRND1-V316 UCTH1-V316 UCTH1-V316 Metal Rung Bracket Top Hat PCS Cushion Sleeve Used with Part Number Material Pan-Steel Ties Description PCSLSH-B-CR TPE Low Smoke, MLTEH/SH Ties/ Cushion Sleeving, Halogen-Free, Banding/Strapping Extra-Heavy or Super-Heavy, and Flame-Resistant 100 (30.5m) Long x 1.05 (26.8 mm) Wide. Installation Tools RT2HT Hand PBTMT Battery BT75SDT Hand Operated Tool Powered Operated for use with Installation Tool Installation Tool Extra-Heavy and for use with Pan-Steel for use with MS75 Super-Heavy cross Extra-Heavy and strapping only. section Pan-Steel Super-Heavy Cross Type MLT Ties. Section MLT Style Ties. 2017 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. Visit us at www.panduit.com SSFL05--SA-ENG Contact Customer Service by email: cs panduit.com Replaces SSFL04--SA-ENG or by phone: 800.777.3300 9/2017