TQP4M0008 Low Loss Reflective SPDT Switch Product Overview The TQP4M0008 is a GaAs FET single-pole, double throw (SPDT) low loss reflective switch with good isolation. The TQP4M0008 may be operated DC control signals from +1.8 to +5 Volts. The TQP4M0008 has 1006000 MHz broadband performance. The TQP4M0008 is packaged in a RoHS-compliant, 6-Pin 2x2mm DFN Package compact 6-pin 2x2 mm surface-mount leadless package. The TQP4M0008 is an ideal choice for wireless Key Features infrastructure and test & measurement applications requiring low insertion loss and high input IP3. It can also General Purpose be used for any general purpose of RF application. Broadband: 1006000 MHz Low Insertion Loss: 0.3 dB at 1 GHz High Input IP3: +56 dBm at 1 GHz Functional Block Diagram CMOS Compatible Dual Voltage Control Lead Free, RoHS Compliant SMT Package Pin 1 Reference Mark RF2 V2 1 6 GND 2 5 RFC Applications RF1 3 4 V1 WLAN Cellular Infrastructure Test and Measurement Backside Paddle - RF/DC GND Smart Energy Top View UHF/VHF LMR General Purpose Broadband Wireless Pin Configuration Pin No. Symbol 1 RF2 2 GND 3 RF1 Ordering Information 4 V1 5 RFC Part No. Description 6 V2 TQP4M0008 2,500 pieces on a 7 reel (standard) Backside Paddle RF/DC GND TQP4M0008-PCB 0.1 6 GHz Evaluation Board Datasheet June 15, 2018 Subject to change without notice 1 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 65 to +150C V1, V2 High State +1.8 +3.3 +5.0 V RF Input Power, CW, 50, T=25C +33 dBm Operating Temperature 40 +95 C Electrical specifications are measured at specified test conditions. Max RF Input Power, peak envelope +37 dBm Specifications are not guaranteed over all recommended operating Control Voltage (V1, V2) +6 V conditions. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range 100 6000 MHz 0.1 1.0 GHz 0.35 0.75 1.0 2.5 GHz 0.45 0.90 Insertion Loss 2.5 3.0 GHz 0.55 0.95 dB 3.0 4.5 GHz 0.65 4.5 6.0 GHz 0.85 0.1 1.0 GHz 20 30 1.0 2.5 GHz 18 25 Isolation 2.5 3.0 GHz 16 22 dB 3.0 4.5 GHz 20 4.5 6.0 GHz 17 0.1 1.0 GHz 20 1.0 2.5 GHz 15 Return Loss, RFC Port 2.5 3.0 GHz 15 dB 3.0 4.5 GHz 17 4.5 6.0 GHz 15 (2) Input P1dB At 1 GHz 37 dBm (2) Input IP3 Pout=+15dBm/tone, at 1 GHz, f=1MHz 45 56 dBm t t (50% CTL to 10/90% RF) 110 ns OFF, ON Switch Time 180 ns tOFF,tON (50% CTL to 2/98% RF) Logic Low 0 0.45 V (2) Digital Control Voltage (V1, V2) Logic High 1.8 3.3 5.0 V Control Pin Current V1 or V2 at +5V 60 A Notes: 1. Test conditions unless otherwise noted: V1 = +3.0V, V2 = 0 V, Temp=+25C, 50 system. 2. Specified IP3 and P1dB at V1 or V2 +3.3V Switch Control Truth Table Control Voltages Signal Path State V1 V2 RFC to RF1 RFC to RF2 Low High Off (isolation) On (Insertion Loss) High Low On (Insertion Loss) Off (isolation) Datasheet June 15, 2018 Subject to change without notice 2 of 7 www.qorvo.com